Table of Contents
Advertisement
CLT2430 5th 8/9
8/10/00
DIRECTORY/
The handset and base each has its own memory for storing phone numbers. The handset
directory can store 20 names/numbers, while the base speed-dial memory holds up to
10 numbers.
Telephone numbers stored in either the handset directory or base memory can be dialed
using just a few key strokes.
Using the handset directory
Storing names/numbers
TONE/ /
*
0
Note:
In memory store operation,
you must press a key within
20 seconds or the phone will
return to standby. If you return
the handset to the base, it will
return to standby, too.
4
Use
,
The name cannot exceed 13 characters.
• Use
case letters and various characters.
• Use
• Press briefly DELETE/SCAN to delete a character.
• Press and hold DELETE/SCAN to delete all numbers and characters at once.
4:29 PM
Page 23
SPEED-DIAL
1
Press and hold MEMORY for about 2 seconds
until
A beep sounds.
2
Use
(01–20) to select the memory location where you
want to store the number.
3
Press INTERCOM/SELECT.
The following screen appears and a cursor flashes
#/
1
indicating that you can now enter the name.
DELETE/SCAN
REDIAL/PAUSE
If the following screen appears, the selected location
is already occupied. Then you can either change the
entry in this location, clear the location, or select
Go Back
,
,
or
to scroll through the character menu. It contains upper and lower
and
to move the cursor to the desired location.
Memory Store
is displayed.
Memory Store
01
02
or
, or enter a two-digit number
Store Name
to choose another location.
Edit Memory07
Delete Memory07
Go Back
or DELETE/SCAN to enter the name.
E19
Advertisement
Table of Contents
