Table of Contents
Advertisement
CLT2430 5th 8/9
8/10/00
DIRECTORY/
Erasing a stored name and phone number
DELETE/SCAN
4
Press
to move the cursor down to the
Delete Memory
5
Press INTERCOM/SELECT. The following
confirmation screen appears.
6
Press
to move the cursor to
7
Press INTERCOM/SELECT or DELETE/SCAN.
There is a confirmation tone and the entry is
deleted. The following screen appears.
8
After a few seconds the display returns to the
Memory Store
You may select another number to delete (return
to step 4) or press MEMORY to return to standby.
4:29 PM
Page 29
SPEED-DIAL
1
Press and hold MEMORY until the display shows the
Memory Store
A beep sounds.
Memory Store
01 SANYO
02 Alison McNab
2
Press
and
to select the memory location you want to edit.
Memory Store
01 SANYO
02 Alison McNab
3
Press INTERCOM/SELECT.
The following screen appears with the memory location
number that you have selected in the display.
Edit Memory02
Delete Memory02
Go Back
command line.
Yes
.
screen.
screen and any stored name/number.
, or enter a two-digit number (01– 20)
Edit Memory02
Delete Memory02
Go Back
Delete Memory02?
Yes
No
Memory02 Deleted
Memory Store
01 SANYO
02
E25
Advertisement
Table of Contents
