Sanyo CLT-2430 Instruction Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Cordless Telephone
  5. CLT-2430
  6. Instruction manual
Sanyo CLT-2430 Instruction Manual

Sanyo CLT-2430 Instruction Manual

2.4-ghz digital spread spectrum cordless telephone with call manager features
Hide thumbs Also See for CLT-2430:
Table of Contents

Advertisement

Quick Links

Download this manual
CLT2430 5th 8/9
8/10/00
INSTRUCTION MANUAL
2.4-GHz
Digital Spread Spectrum

Cordless Telephone

with Call Manager Features
IMPORTANT
Charge the handset battery pack for a full 15 hours before using your
cordless handset for the first time.
4:28 PM
Page 1
www.sanyocanada.com
CLT-2430

Advertisement

Table of Contents
loading

Related Manuals for Sanyo CLT-2430

Summary of Contents for Sanyo CLT-2430

  • Page 1: Cordless Telephone

    CLT2430 5th 8/9 8/10/00 4:28 PM Page 1 INSTRUCTION MANUAL CLT-2430 2.4-GHz Digital Spread Spectrum Cordless Telephone with Call Manager Features IMPORTANT Charge the handset battery pack for a full 15 hours before using your cordless handset for the first time.
  • Page 2 4:36 PM Page 2 Introduction Congratulations on your purchase of the CLT-2430 cordless telephone. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 2.4-GHz Digital Spread Spectrum technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes.

  • Page 3: Controls And Functions

    CLT2430 5th 8/9 8/10/00 4:28 PM Page 3 Controls and functions 1. Handset antenna 12. REDIAL/PAUSE key 2. Headset jack cover 13. Microphone 3. HandsFree speaker 14. CALL REVIEW/VOLUME (up) key 4. Battery compartment 15. INTERCOM/SELECT key 5. Earpiece speaker 16.
  • Page 4 CLT2430 5th 8/9 8/10/00 4:28 PM Page 4 21. Handset retainer 22. Base charging contacts 23. INTERCOM/PAGE/FIND key 24. FLASH key 25. SPEAKER key 26. REDIAL/PAUSE key 27. MEMORY key 28. CALLERS indicator 29. CHARGE/IN USE indicator 30. INTERCOM indicator 31.

  • Page 5: Table Of Contents

    Pre-programmed calling features...........E44 Adding new features .................E45 Call Waiting with Options..............E47 Additional Information Changing the digital security code ..........E48 Installing the belt clip.................E49 Headset installation ................E49 Note on power source...............E50 Maintenance ..................E50 Troubleshooting................E51 Technical Information ..............E52 Warranty ...................E53 Sanyo-On-Site (SOS) Information ..........E54...

  • Page 6: Getting Started Read This First

    CLT2430 5th 8/9 8/10/00 4:28 PM Page 6 GETTING STARTED Read this first This cordless telephone must be set up before use. Follow these steps: Step 1 (page E3) Unpack and check the telephone and accessories. Step 2 (page E4 to E8) Choose the best location to set up the base unit.

  • Page 7: Step 1: Checking The Package Contents

    Make sure you have received the following items in the package. • AC adaptor • Base unit • Handset (AD-350) • Bottom bracket • Rechargeable • Telephone line for desktop use battery pack cord (1) and wall-mounting (SANYO 3KR-600AAL) • This Owner's Manual • Belt clip...

  • Page 8: Step 2: Setting Up The Base Unit

    CLT2430 5th 8/9 8/10/00 4:28 PM Page 8 GETTING STARTED Setting up the base unit Avoid places near electrical equipment such as refrigerators, computers, TVs, microwaves or fluorescent lamps. These may cause interference or reduce the operating range of the cordless telephone. Do the following steps: •...

  • Page 9: Desktop Use

    CLT2430 5th 8/9 8/10/00 4:28 PM Page 9 GETTING STARTED Desktop use Connect the base unit If you want to install the base unit on the wall, see page E7. To AC outlet To DC IN 9V AC adaptor (supplied) To telephone outlet To TEL LINE Telephone line cord...

  • Page 10: Choose The Dialing Mode

    CLT2430 5th 8/9 8/10/00 4:28 PM Page 10 GETTING STARTED Notes: • Use only the supplied AD-350 AC adaptor. Do not use any other AC adaptor. • Connect the AC adaptor to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC adaptor easily. •...

  • Page 11: Mounting The Base Unit On A Wall

    CLT2430 5th 8/9 8/10/00 4:28 PM Page 11 GETTING STARTED Mounting the base unit on a wall Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. Attach the bottom bracket to the base as shown.
  • Page 12 CLT2430 5th 8/9 8/10/00 4:28 PM Page 12 GETTING STARTED On the base unit, pull the handset retainer out Handset retainer of the slot. Rotate it clockwise 180 degrees. Flip the retainer. Slide it back into the slot so that the lip of the retainer is up and the points down.

  • Page 13: Step 3: Preparing The Battery Pack

    AC adaptor is plugged in and that the handset makes good contact with the base charging contacts. Note: CHARGE/IN USE Use only the battery pack supplied or the specified Sanyo types with your phone. Type: SANYO 3KR-600AAL or SANYO/GE GES-PCF01...

  • Page 14: Cleaning The Battery Contacts

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 14 GETTING STARTED Battery use time (per charge) With a fully charged battery: • Six hours continuous use. • Seven days when the handset is in the standby mode. When the battery charge level becomes low Low Battery When the voltage of the battery pack in the handset is...

  • Page 15: Making A Call

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 15 BASICS Making a call With the handset Dialing from standby mode Enter the phone number. (Up to 32 digits.) Example: Enter 9057609944 9057609944 Press TALK/END. Talk flashes in the display. Talk 9057609944 The volume setting is displayed.

  • Page 16: Handsfree Speakerphone In The Handset

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 16 BASICS Dialing from talk mode Press TALK/END or SPEAKER Talk flashes on the display. Press TALK/END Press SPEAKER Talk Talk The volume setting is displayed. For example, if the volume is set to high, the display shows: Talk Talk <High>...
  • Page 17 CLT2430 5th 8/9 8/10/00 4:29 PM Page 17 BASICS With the base Press SPEAKER on the base. The SPEAKER indicator lights. Dial the number on the keypad. When you finish the call, press SPEAKER on the base to hang up.

  • Page 18: Receiving A Call

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 18 BASICS Receiving a call With the handset Incoming call The phone rings. appears. Incoming Call Press TALK/END. Talk , the call time display and the volume setting appear. You can also press SPEAKER on the handset to answer the call.

  • Page 19: Call Waiting

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 19 BASICS With the base The base rings. The CHARGE/IN USE indicator flashes. Press SPEAKER. When you finish the call, press SPEAKER to hang up. Call Waiting Note: You must subscribe to Call Waiting service to use this feature. When a call is received during a telephone call already in progress, you hear a beep.

  • Page 20: Lighted Keypad

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 20 BASICS Lighted keypad The dialing keypad and the TALK/END key on the handset light up when you press any key on the keypad. The light turns off if no key is pressed for 5 seconds. Scanning Your phone automatically selects the clearest possible channel every time you receive or place a call.

  • Page 21: Redialing A Call

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 21 BASICS Redialing a call With the handset The last three phone numbers dialed can be quickly redialed. Redialing from standby mode Press REDIAL/PAUSE. The phone number that was last dialed appears in the display.

  • Page 22: Redialing From Talk Mode

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 22 BASICS Redialing from talk mode Press TALK/END. Talk appears on the display. Talk Talk <High> Press REDIAL/PAUSE. The last number dialed will be displayed. Only the last number dialed can be accessed while in talk mode. To hang up, press TALK/END (or place the handset on the base).

  • Page 23: Using The Handset Directory

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 23 DIRECTORY/ SPEED-DIAL The handset and base each has its own memory for storing phone numbers. The handset directory can store 20 names/numbers, while the base speed-dial memory holds up to 10 numbers. Telephone numbers stored in either the handset directory or base memory can be dialed using just a few key strokes.
  • Page 24 Memory07 Stored confirmation screen. Memory storage is complete. For example, if you store a name and Memory Store number into memory location number 07, 07 SANYO Memory07 Stored the display shows Memory Store After about 2 seconds, is displayed. Press MEMORY to return to standby mode.
  • Page 25 Memory dialing from standby mode Press MEMORY. The handset displays your programmed memory locations. A beep sounds. 01 SANYO 02 Alison McNab 03 MOM AND DAD Press , or enter a two-digit number (01– 20) to select the memory location you would like to dial.
  • Page 26 DIRECTORY/ SPEED-DIAL Display a programmed number to toggle between the name display and the number display. Name display Number display 01 SANYO 01 9057609944 02 Alison McNab 02 5452930 03 MOM AND DAD 03 8175551212 When the stored phone number has 14 or more digits, “ \ ” is displayed next Note: to the 12th digit.
  • Page 27 Press and hold MEMORY until the display shows Memory Store screen and any stored name/number. A beep sounds. Memory Store 01 SANYO 02 Alison McNab Press , or enter a two-digit number (01–20) to select the memory location you want to edit.
  • Page 28 The memory storage is complete. For example, if you store a name and number into memory location number 02, the display shows Memory Store Memory02 stored 01 SANYO Memory Store 02 Alison McNab After about 2 seconds, is displayed.
  • Page 29 Press and hold MEMORY until the display shows the Memory Store screen and any stored name/number. A beep sounds. Memory Store 01 SANYO 02 Alison McNab Press , or enter a two-digit number (01– 20) to select the memory location you want to edit.

  • Page 30: Using The Base Station Speed-Dial Memory

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 30 DIRECTORY/ SPEED-DIAL Using the base station speed-dial memory Storing numbers in the speed-dial memory You can store only numbers in the base memory. Press MEMORY. The CHARGE/IN USE indicator blinks. Dial the number you want to store. (up to 16 digits) Press MEMORY and enter the memory location number (0–9) on the keypad.
  • Page 31 CLT2430 5th 8/9 8/10/00 4:29 PM Page 31 DIRECTORY/ SPEED-DIAL Dialing a number from the speed-dial memory Press SPEAKER. The SPEAKER indicator lights. Press MEMORY and enter the memory location number (0–9) on the keypad. Then the stored number will be dialed. Erasing a number in the speed-dial memory Press MEMORY.

  • Page 32: Caller Id Features Caller Id

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 32 CALLER ID FEATURES Caller ID You must subscribe to the Caller ID service from your local telephone company to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller's name and phone number on the display before you answer the phone.

  • Page 33: Caller Id Features

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 33 CALLER ID FEATURES To change your Caller ID options: Press SERVICE MENU. The following screen appears: Select Service 1 Voice Mail 2 Network Svc Option , then press INTERCOM/SELECT. Press twice) to select The following screen appears: 1 Auto Talk:Off 2 CIDCW...

  • Page 34: When The Telephone Rings

    If the Caller ID service includes the caller’s name, it appears on the display (up to 15 letters). Number of calls from the same phone number The date and time received 5/11 12:30PM 01 SANYO Caller's name 905-760-9944 Caller's phone number Here are some typical displays:...

  • Page 35: Viewing The Caller Id List

    The screen shows the number of new calls and total calls. Total:02 Press to display the latest caller information. 5/17 12:30PM 03 SANYO 905-760-9944 Press to see the next caller. Or press to see previous caller. Press CID/FLASH or return the handset on the base to return to standby.

  • Page 36: Deleting Information From The Caller Id List

    FEATURES Deleting information from the Caller ID list The Caller ID list of the CLT-2430 stores up to 50 entries. If the phone receives the 51st call, the oldest one in the list is automatically deleted. Any Caller ID entry can be deleted manually.
  • Page 37 CLT2430 5th 8/9 8/10/00 4:29 PM Page 37 CALLER ID FEATURES Deleting all Caller ID names/numbers Press CID/FLASH. Total:02 Press DELETE/SCAN. Delete All? Press to select Press INTERCOM/SELECT or DELETE/SCAN. When the pointer is at A beep tone sounds and all stored Caller ID entries are deleted.

  • Page 38: Using The Caller Id List

    9057609944 Notes: • When a long distance number is selected, appears in the display. • You cannot make a call from the Caller ID list if your CLT-2430 is connected to private branch exchange (PBX). Long distance numbers Press to add or remove the long distance prefix from the displayed number in step1.
  • Page 39 Select the phone number to be stored from the Caller ID list by pressing 5/17 12:30PM 03 SANYO 905-760-9944 Press MEMORY. Select Location 01 SANYO 02 Alison McNab Press to select the memory location. Or press the dial button ( – ) and select the number (01–20).

  • Page 40: Using Caller Id On Call Waiting Service

    Talk 10:30 SANYO 905-760-9944 Press CID/FLASH. You will be able to talk with the second caller. The first caller will be put on hold.

  • Page 41: Advanced Calling Features

    Many telephone companies offer an electronic mailbox service. When you subscribe to this service, your callers can leave messages for you. The CLT-2430 allows you to program your Voice Mailbox access number into its memory for quick retrieval of your messages.

  • Page 42: Voice Mail Access

    FEATURES Voice Mail access If you subscribe to voice mail service, you can program your CLT-2430 to easily access your voice mailbox. The voice mail indicator on the base of your phone flashes whenever you have messages waiting in your voice mailbox.
  • Page 43 CLT2430 5th 8/9 8/10/00 4:29 PM Page 43 ADVANCED CALLING FEATURES Resetting the message waiting indicator You may need to occasionally reset the VOICE MAIL indicator if it remains on after you have retrieved your messages. To reset the indicator, put the handset on the base then press and hold the INTERCOM/PAGE/FIND key for two seconds, or until the indicator stops flashing.

  • Page 44: Call Transfer Feature

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 44 ADVANCED CALLING FEATURES Call transfer feature Transferring a call To transfer from the handset to the base Press INTERCOM/SELECT on the handset during Talk mode. The caller is put on hold and a series of beeps sound on the base.

  • Page 45: Intercom Feature

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 45 ADVANCED CALLING FEATURES Intercom feature Using the intercom of your phone Paging from the base to handset Press INTERCOM/PAGE/FIND on the base. The handset beeps. (If the handset does not answer, press INTERCOM/PAGE/FIND again to disconnect.) Paging The INTERCOM indicator on the base flashes.

  • Page 46: 3-Way Conference Feature

    ADVANCED CALLING FEATURES 3-way conference feature 3-way conference The CLT-2430 allows 3-way conversation between the handset, base and an outside line. When a call is in progress on the handset Press SPEAKER on the base. This will establish the 3-way conversation mode.

  • Page 47: Accessing Calling Features

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 47 ADVANCED CALLING FEATURES Accessing calling features To access the network calling features programmed into your phone, follow the instructions below. General descriptions of each service are given in the following section. For complete instructions for using each service, please contact your local telephone company.

  • Page 48: Pre-Programmed Calling Features

    ADVANCED CALLING FEATURES Pre-programmed calling features The following calling features and activation codes are pre-programmed in the CLT-2430. Activation codes may vary depending on local telephone company. See next page to reprogram a different code of any of these features.

  • Page 49: Adding New Features

    Adding new features The last eight calling feature locations are available for you to program new features into your CLT-2430. You may also reprogram features in any of the other locations or restore the pre-programmed service at any time. Add or edit a service Press and hold SERVICE MENU.
  • Page 50 CLT2430 5th 8/9 8/10/00 4:29 PM Page 50 ADVANCED CALLING FEATURES Press INTERCOM/SELECT to edit the feature stored in location two. The following screen appears: Service Name Busy Redial The cursor flashes indicating that the name can be edited. Use the keys to enter a new name.

  • Page 51: Call Waiting With Options

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 51 ADVANCED CALLING FEATURES Call Waiting with Options This feature gives you more options for Caller ID on Call Waiting (Visual Call Waiting). At the touch of a button, you can ask the waiting caller to hold, send the caller to your voice mail service or have a conference with both first and second callers.

  • Page 52: Changing The Digital Security Code

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 52 ADDITIONAL INFORMATION Your CLT-2430 is pre-programmed with 8 call waiting options. Option Message Press CID/FLASH to switch callers Switch/FLASH Ask to Hold Pre-recorded message asks 2nd caller to hold Tell Busy Pre-recorded message tells 2nd caller you are busy...

  • Page 53: Installing The Belt Clip

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 53 ADDITIONAL INFORMATION Installing the belt clip To attach the belt clip To remove the belt clip Insert the belt clip into the holes on Insert a standard flat head screwdriver each side of the handset. Press down into a notch of the belt clip, then remove until it clicks.

  • Page 54: Note On Power Source

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 54 ADDITIONAL INFORMATION Note on power source RECYCLING NICKEL- Battery replacement and CADMIUM BATTERIES handling NICKEL-CADMIUM When the operating time becomes short, even after a battery is recharged, BATTERIES MUST please replace the battery. BE DISPOSED OF PROPERLY.

  • Page 55: Troubleshooting

    CLT2430 5th 8/9 8/10/00 4:29 PM Page 55 TROUBLESHOOTING If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The CHARGE/IN USE • Make sure the AC adaptor is plugged into the base unit indicator won't come on and wall outlet.

  • Page 56: Technical Information

    Operation is subject to the following two conditions: (1) this This symbol on the product is used to identify the following device may not cause interference, and (2) this device must important information. Use only with specified SANYO power accept any interference, including interference that may cause adaptor.

  • Page 57: Warranty

    WHAT IS NOT COVERED improvement in or on the product. (a) Communications products purchased (b). In no event shall SANYO Canada Inc. or any outside Canada. of its Authorized Dealers be liable for (b) Communications products purchased in a special or consequential damage arising used condition.
  • Page 58 4:29 PM Page 58 At Sanyo, fulfilling the needs of our customers is a priority. That’s why we created our Sanyo On Site (SOS) customer service program that guarantees satisfaction. We’re so confident about the quality of our products that we’re expanding our warranty to include the following exceptional, new level of service.
  • Page 59 CLT2430 5th 8/9 8/10/00 4:29 PM Page 59...
  • Page 60 CLT2430 5th 8/9 8/10/00 4:29 PM Page 60 Covered under one or more of the following U.S. patents: 2000 SANYO All rights reserved UCZZ01682DZ Printed in China...

Table of Contents