Call Waiting - Sanyo CLT-2430 Instruction Manual

CLT2430 5th 8/9 8/10/00
BASICS
With the base

Call Waiting

Note: You must subscribe to Call Waiting service to use this feature.
When a call is received during a telephone call already in progress, you hear a beep.
Press CID/FLASH to switch to the new call.
If you also subscribe to Caller ID on Call Waiting (Visual Call Waiting), you will see the
name and number of the second caller. (See page E36.)
4:29 PM Page 19
1
The base rings. The CHARGE/IN USE indicator
flashes.
2
Press SPEAKER.
3
When you finish the call, press SPEAKER to
hang up.
E15