TYAN S5221 User Manual page 32

3.2.1 SATA Port Setup
Phoenix cME First BIOS Pro Setup Utility
Main
SATA Port X
Type:
Multi-Sector Transfers:
LBA Mode Control:
32 Bit I/O:
Transfer Mode:
Ultra DMA Mode:
F1 Help Select Item
↑↓
Esc Exit Select Menu
← →
The system displays advanced details like the number of
heads/cylinders/sectors on the detected disk and the maximum storage
capacity of the disk.
This option lets you set the following hard disk parameters:
Type
Selects the type of device connected to the system.
Auto / CD/DVD / Not Installed / ARMD
Multi-Sector Transfers
This option allows you to specify the number of sectors per block for
multiple sector transfers.
Disabled/ 2 Sectors / 4 Sectors / 8 Sectors / 16 Sectors
LBA Mode Control
Enables or disables LBA Mode.
When LBA is turned on, the BIOS will enable geometry translation. This
translation may be done in the same way that it is done in Extended CHS
or large mode, or it may be done using a different algorithm called LBA-
assist translation. The translated geometry is still what is presented to
the operating system for use in Int 13h calls. The difference between
LBA and ECHS is that when using ECHS the BIOS translates the
parameters used by these calls from the translated geometry to the
drive's logical geometry. With LBA, it translates from the translated
geometry directly into a logical block (sector) number.
Disabled / Enabled
[None]
Item Specific Help
User = your enter parameters
of hard-disk drive installed at
this connection.
[Auto]
Auto = autotypes hard-disk
drive installed here.
1-39 = you select pre-
[Disabled]
determined type of hard-disk
[Disabled]
drive installed here.
[Disabled]
CD-ROM = a CD-ROM drive
[Disabled]
is installed here.
[Disabled]
ATAPI Removable =
removable disk drive is
installed here.
-/+ Change Values
Enter Select Sub-Menu
32
http://www.TYAN®.com
F9 Setup Defaults
F10 Save and Exit