Fujitsu fi-4530C Operator's Manual page 86

•
For Windows 95 / Windows NT 4.0
1) When turning on the power, check that the scanner is connected to your PC.
2) Right click the [FUJITSU Scanner Control Center] icon in the task tray, then select
[Option].
3) Select the [Scanner Information] tab. The following screen is displayed.
4) Click the [Pad Counts Reset] button.
⇒ The following message is displayed.
Click [Yes].
The Pad counter returns to "0".
fi-4530C Image Scanner Operator's Guide
4.2 Replacing the Pad ASSY
4
71