Fujitsu fi-4530C Operator's Manual page 108

Continued from the previous page
Is the document stack 10mm (A4)/
5mm (A3) or less?
YES
Is the Pad ASSY attached
correctly?
YES
Is the Pad ASSY dirty?
NO
Is the Pad ASSY worn out?
NO
Contact the manufacturer's
authorized service center.
*1) For details on the requirements, refer to "6.2 Document Quality" on page 103.
*2) For details on double-feeds, refer to "6.5 Double-feed Detection Conditions" on page
108.
*3) For details on how to clean the Pad ASSY, refer to "3.2 Cleaning the ADF" on page 54.
*4) For details on how to replace the Pad ASSY, refer to "4.2 Replacing the Pad ASSY" on
page 67.
*5) For details on how to clean the Ultra sonic sensor, refer to the "3.2 Cleaning the ADF"
on page 54.
5.2 Remedying Common Troubles
NO Reduce the number of
sheets in the stack.
NO
Attach the Pad ASSY
correctly.(*4)
YES
Clean the Pad ASSY.(*3)
YES
Replace the Pad ASSY.(*4)
fi-4530C Image Scanner Operator's Guide
5
93