3-5) Title Menu Function Setting; 3-6) Alarm Menu Function Setting - Samsung SSC21WEB User Manual

3-5) TITLE MENU Function setting

• Function: Set the title of each camera at your discretion.
Setting method: Move to #5. TITLE MENU by using œ œ ENTER√ √ SWITCH at SETUP MENU,
•
and press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure
shows the initial setting status.)
06/01/03 13:14:00
TITLE SETTING
CAMERA1 CAM1
CAMERA2 CAM2
CAMERA3 CAM3
CAMERA4 CAM4
CAMERA5 CAM5
CAMERA6 CAM6
CAMERA7 CAM7
CAMERA8 BCAM8
0 1 2 3 4 5 6 7 8 9 : = . (
A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z [ / ] _ ~ ← + −
Move to a target camera channel by using œ œ ENTER√ √ SWITCH then press the ENTER KEY to
display a cursor at the space of the first character of camera title. Move the cursor to a target character
in OSD box of lower part by turning left and right œ œ ENTER√ √ SWITCH left or right, then press the
ENTER KEY to set the character. The cursor automatically moves to the next space for a new character
after one character is set. Set the title of camera by repeating the same method.
(Only eight characters are available for a camera title.)
Eng-28
)

3-6) ALARM MENU Function setting

• Function: Allows users to set the ALARM MODE for each camera.
Setting method: Move to #6. ALARM MENU by using œ œ ENTER√ √ SWITCH at SETUP
•
MENU, and press the ENTER SWITCH to display the OSD as shown in the figure below. (The
figure shows the initial setting status.)
06/01/03 13:14:00
ALARM SETTING
CAM1 ON
CAM2 ON
CAM3 ON
CAM4 ON
CAM5 ON
CAM6 ON
CAM7 ON
CAM8 ON
HOLD TIME 05SEC
ALARM ON TIME 00:00
ALARM OFF TIME 00:00
BUZZER ON
(1) CAM1 to CAM8 item sets whether the alarm sensor connected to the camera is used or not.
(ON: Alarm function setting, OFF: Alarm function canceling)
(2) HOLD TIME item sets time to freeze alarm operation when alarm occuring.
(HOLD TIME to be set: 05SEC ~ 1MIN ~ 30MIN)
(3) ALARM ON/OFF TIME item sets beginning time (ON) and end time (OFF) that monitor
recognizes alarm operation as alarm event.
* Note :Even if CAMERA ALARM is set to ON, alarm operation is not carried at time band except
pre-set ALARM ON/OFF TIME.
(4) BUZZER item sets whether or not buzzer device set in monitor is used at an ALARM or LOSS
occurring.
(ON: Buzzer operation, OFF: NA)
Eng-29