2-4) Power Save- Key; 2-5) Alarm Reset- Key; 2-6) Quad/Page- Key; 2-7) Live/Vcr- Key - Samsung SSC21WEB User Manual

2-4) POWER SAVE- KEY

Allows users to set POWER SAVE MODE of monitor. PICTURE screen is off when the POWER
SAVE KEY is pressed, and the ON/OFF status of the monitor can be judged through LED ON/OFF
status. Users can exit from POWER SAVE MODE by pressing POWER SAVE BUTTON again under
picture "OFF" status. POWER SAVE MODE is automatically cancelled and picture is "ON" when an
event such as an alarm or loss at POWER SAVE MODE occurs.

2-5) ALARM RESET- KEY

Alarm function can be cancelled while the alarm is working.

2-6) QUAD/PAGE- KEY

Allows users to display QUAD A or QUAD B at QUAD DISPLAY MODE.
• QUAD A: QUAD DISPLAY MODE from Camera 1 to Camera 4
• QUAD B: QUAD DISPLAY MODE from Camera 5 to Camera 8

2-7) LIVE/VCR- KEY

Allows users to switch LIVE MODE to VCR MODE or VCR MODE to LIVE MODE. If VCR MODE
is cancelled, the QUAD picture of LIVE MODE will be automatically displayed. In case any event
happens at VCR MODE such as LOSS or ALARM, the MODE will be automatically switched to LIVE
MODE, and the pre-set operation for the event will be carried out. If there is no external input at VCR
MODE, the OSD "NO SIGNAL" will be displayed.
• LIVE MODE: Image and voice signal from CAMERA is displayed.
• VCR MODE: External image and voice signal from VCR terminal from the rear of the monitor is
displayed.
Eng-22

2-8) PIP- KEY

Can be used to see the main screen while Single screen is displayed. The main screen can be changed
and transfered to another channel while PIP is working. Please refer to "CHAPTER 4. DISPLAY
MODE SETTING" for PIP function and details.

2-9) FREEZE- KEY

This key allows users to see a target camera picture at PAUSE MODE. If users select the camera with
the œ œ ENTER√ √ KEY, and press the FREEZE BUTTON, the OSD "F" will be displayed on pause
picture from the camera. Other FRONT KEY input is ignored at FREEZE MODE, and other FRONT
KEY inputs will be available only after the FREEZE MODE is cancelled.

2-10) SEQUENCE- KEY

It makes a picture switch sequentially. This means that display the picture will be displayed during the
DWELL TIME pre-set at the DWELL MENU of SETUP MENU, and switch the picture automatically
as a pre-set sequence. Please refer to Chapter 3. DWELL TIME MENU function and setting method for
details of DWELL TIME setting.

2-11) ZOOM- KEY

It zooms a part of a picture doubling it in the display. If the ZOOM BUTTON is pressed, zoom area
will be displayed. Users can move to a target area by turning œ œ ENTER√ √ SWITCH left and right at
this time. If œ œ ENTER√ √ SWITCH is pressed at the target area, the area will be displayed with 2 times
larger.

2-12) POWER- KEY

It turns ON/OFF the power of the monitor and camera at the same time.
In case the monitor power is ON, LED of monitor front is lit.
Eng-23