Operation - Pyramid 2650 User Manual

AUTO ALIGNING TIME CLOCK INSTRUCTIONS
Model 2650
USING TIME CLOCK
AUTO or AUTO/MANUAL PUNCH
1
To Punch IN or OUT, gently feed time card
(#42415) into time card slot located at the
top of the time clock, making sure correct
side of time card is facing towards user.
2
Quickly release the card, as it will
automatically be pulled.
3
Do not force or jam the time card.
4
Card will release back to user once punch
is printed.
MANUAL or AUTO/MANUAL PUNCH
1
Press corresponding button to activate
the desired column. Button will light
up red when activated.
2
To Punch IN or OUT, gently feed time
card (#42415) into time card slot
located at the top of the time clock,
making sure correct side of time card
is facing towards user.
3 Quickly release the card, as it will
automatically be pulled.
4
Do not force or jam the time card.
5 Card will release back to user once
punch is printed.
Auto Manual punch format allows user to toggle between Auto & Manual punch mode
if necessary. Please see Column Shift instructions on page 7 for setting up Auto
Manual punch mode.
pyramidtimesystems.com
Activated column
lights up red.
IN OUT IN OUT IN OUT

OPERATION

11