Troubleshooting, Print Adjust & Master Reset - Pyramid 2650 User Manual

AUTO ALIGNING TIME CLOCK INSTRUCTIONS
Model 2650
TROUBLESHOOTING
TIME CARD MISFEED
In the event the time card will not feed, re-feed the time card. If issue persists, please
check list for possible causes:
:
2650 TIME CARD MISFEED
POSSIBLE CAUSES
Time card inserted too hard into time clock
Time card held too long
Time card inserted into time clock on an angle
Time card is wet or damaged
:
2650 WRONG SIDE PRINTING
PROBABLE CAUSE
Time card is facing wrong way
IMPAIRED PRINTING
In the event the time clock printing is impaired, please check list for possible causes:
:
2650 IMPAIRED PRINTING
SYMPTOM
Time card feeds
with no printing
Punches print outside
of date box
PRINT ADJUSTMENT
1
In the ADVANCED MENU = N menu, press
2
Press SELECT button to scroll through Advanced Menu options until
PRINT ADJUST = N menu is displayed
3
Press SELECT button.
4 In the LEFT/RIGHT = 0 menu, press
or press t(DOWN) to adjust printing to right (e.g. 1,2,3 . . . 9).
5
Press SELECT for desired left/right adjustment.
In the UP/DOWN = 0 menu press
6
printing down.
7
Press SELECT for desired up/down adjustment.
8
Feed time card through time clock to test print adjustment.
9 Repeat steps 1-7 if additional adjustments are necessary.
MASTER RESET
Erases time clock's memory & restores default factory settings:
1
Unplug time clock.
(UP) button and hold while plugging unit back in.
2 Press the
s
Continue to hold
88:88 TIME NOT SET flashes on display screen.
3
Re-program time clock.
4
pyramidtimesystems.com
PROBABLE CAUSE
Ribbon not installed properly
(UP) to adjust printing to left (e.g. 1,2,3 . . . 9),
s
(UP) to move printing up or t(DOWN) to move
s
(UP) button for a few seconds & release.
s
TROUBLESHOOTING, PRINT ADJUST
ACTION
Make sure "active" time card side is facing user
ACTION
Check that ribbon cartridge is
properly installed. See page 12.
Follow Print Adjustment
instructions below
(UP) to choose "YES".
s
ACTION
Re-Feed Card
Re-Feed Card
Re-Feed Card
Use new time card
& MASTER RESET
13