Cleaning Between The Outer And Inner Door Glass; To Remove The Outer Glass - Electrolux EOG 6330 Instruction Book

Cleaning between the outer and inner
door glass
You can remove the glass from the oven door if you need to.

To remove the outer glass

1 Open the oven door so you can get at the two cross head screws on
the top of the oven door.
2 Loosen these screws using a pozidrive screwdriver.
Please note that the door
glass on your product may
differ in type and shape from
that shown in the diagram.
3 You should hold the door glass securely in place with one hand,
whilst removing the screws completely, with the other hand. If you do
not do this, the door glass could fall forward. Still holding the door
glass, remove the trim from the top of the door.
Note the correct position of the trim.
4 Using both hands, gently tilt the top of the door glass towards you.
Lift slightly to disengage the locators at the bottom of the door.
5 Clean the outer and inner glass using hot soapy water and mild
abrasives such as 'Cif'.
6 Replace the glass by holding it in both hands and gently placing the
locators into the holes of the brackets at the bottom of the door. Push
the top of the glass towards the oven door, and make sure the screw
location holes line up. Replace the trim on top of the door making
sure that it is correctly positioned. You can check this by looking
through the air gap on the top of the door and checking that the
screw location holes line up.
7 Hold the glass in place with one hand and replace the cross head
screws into the location holes, with the other hand.
8 Tighten the screws using a pozidrive screwdriver.
Close the door.
E O G 6 3 3 0
26