Using The Font Window - Star LC-90 User Manual

22 User Setup Utility

Using the Font window

While in the User Setup Utility, select Font from the menu bar.
The following describes the various settings that are available for each
parameter on this screen.
NLQ Font
Select the font that you want to use as the printer's default near letter-
quality font.
Pitch
Select the print pitch (character spacing) you want to use for printing.
Print mode
Select the print mode you want to use.
Selecting NLQ provides near letter quality output, while selecting Draft
provides draft quality. Draft quality printing may be less attractive than near
letter quality, but the printing operation is faster.
Code page
Select the code page you want to use for printing.
For details on what characters are included in each code page, see "Character
Sets" on page 60 of this manual.
Exit Load Save General
NLQ (•) Courier
Font ( ) Sanserif
Pitch (•) 10 cpi
( ) 12 cpi
Print (•) NLQ
mode ( ) Draft
Code (•) IBM-PC (CP437)
page ( ) Multi-Lingual
Current Data: Current Font Setting
TAB = Next Box = Scroll up
SPACE = Set Function = Scroll down
Font Paper Adjust.
Font ( ) Enabled
*
lock (•) Disabled
Zero (•) Normal
*
style ( ) Slashed
Country (•) USA
*
( ) France
Char ( ) Italic
*
table (•) IBM Graphics 2
Port Help
*
*
*
*
= Menu Select