Connecting To Your Computer - Star LC-90 User Manual

Connecting to your computer

The computer sends data to the printer through a cable. This printer does not
come with a cable, so you must purchase one of your own. You will probably
want to use a standard parallel cable for connection, but note that you can also
use an optional Serial-To-Parallel Interface Converter (SPC-8K).
Important!
The following instructions apply to the Centronics parallel cable that is used
with an IBM-compatible personal computer. Note that they do not apply to all
types of computers and cables. If you are unsure about what type of cable you
should use to connect with your computer, consult with your dealer.
For an IBM-compatible personal computer:
Use a standard 36-pin Centronics parallel cable.
The parallel cable should be no longer than six feet (two meters). Longer
cables can result in poor transfer of information.
Connecting to your computer 7