Selecting Fonts In Ms-Dos Applications - Star LC-90 User Manual

44 Using the Printer with MS-DOS
If none of the printers listed above is available in the application, choose
one of the following. Once again, you should choose the one that is nearest
to the top in the following list. Use User Setup Utility to select IBM
emulation (page 20).
To print, follow the instructions given in the manual of the application you
are using. Typically, you would select the application's PRINT command,
make any necessary changes in the window that appears (such as the
number of copies to be printed), and then press the Enter key to start
printing.

Selecting fonts in MS-DOS applications

Use the User Setup Utility to select a font when running an application under
MS-DOS. For details on the fonts that are available and how to select them, see
"NLQ Font" on page 22 of this manual.
IBM ProPrinter III
IBM ProPrinter II
IBM ProPrinter