Exam Applications Presets
Defining a User Preset (cont'd)
.
.
14–98
NOTE: If a user application preset was used at the start of the
process, the system prompt states:
"Overwrite Existing Data? ' y' or ' n'"
Enter ' y' to write over the existing user preset.
Enter ' n' to get the message: "Input User Preset Number (1-8)"
and create a new user preset.
Use the Trackball to move the arrow cursor over the Preset
Name area.
Press Set.
NOTE: If new data is not saved, all changes will be lost when
another preset or New Patient is selected.
LOGIQ
500 Basic Users Manual
2276612–100 Rev. 0