GE Medical Systems LOGIO 500 User Manual page 48

Safety Precautions
Best practices while scanning (cont'd)
Controls
Mode Control
All Acoustic Output
B Focus Comb
B/M/CFD
B/M Focal Zone Position
and Number
B/CFD Scan Area
Doppler M/D Cursor
Doppler Doppler Sample
Volume Gate Length
Doppler Velocity Scale
PWD/CFD Freq. Hi/Low
CFD Scan Area
B/M/CFD
Table 2–3. Controls Affecting Acoustic Output
Acoustic Output Default Levels
2–18
Affect
Direct.
Significant
Indirect. Minor
Depth Indirect. Minor
(FOV)
Indirect. Minor
Indirect.
Indirect. Minor
Indirect. Minor
Indirect. Minor
Indirect. Minor
Indirect. Minor
Zoom Indirect. Minor
In order to assure that an exam does not start at a high output
level, the LOGIQ
output level. This reduced level is preset programmable and
depends upon exam category, application preset and probe
selected. It takes effect when the system is powered on or New
Patient is selected.
Default Setting
The middle setting is a factory preset
determined to be a reasonable setting for all
exams. Use presets to set the output
preferred by scan mode and exam
combination.
Probe-dependent operator
Probe-dependent system
Application-dependent system preset.
Application-dependent operator preset.
500 initiates scanning at a reduced default
LOGIQ
Off.
preset.
preset.
Off.
Off.
Low.
Off.
Off.
500 Basic Users Manual
2276612–100 Rev. 0