B-Mode; Introduction; B-Mode Key Operation - GE Medical Systems LOGIO 500 User Manual

B–Mode

Introduction

B-Mode Key Operation

5–2
The LOGIQ 500 offers a wide variety of display formats. Each
format shows the operator valuable information relating to
patient data and system scan parameters.
B-Mode, also referred to as 2-D Mode, displays a two
dimensional gray scale image of the structures within the
probe's field of view. The anatomy imaged can be evaluated,
measurements and calculations performed as well as making
an initial survey prior to entering other modes.
Pressing the B-Mode key while in a combination of other modes
will result in the following:
Current Mode
B/PD
B/M
B/CFM and PD
B/CFM and M/CFM
B/CFM
M/CFM
Table 5–1. B-Mode Key Operation

B-Mode

Resultant Mode
B
B
B/CFM
B/CFM
B
B/CFM
LOGIQ 500 Basic Users Manual
2276612–100 Rev. 0