Recording From External Equipment You Are; Watching - Samsung DVD-R121 Instruction Manual

Recording from external
equipment you are

watching

Before you start
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
Press the OPEN/CLOSE button to close
2
the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 37)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 37)
3 Press the INPUT button to select the input
source according to the connection you
made.
The front panel display changes in the following
sequence:
PR Number
If you connect a digital camcorder, press the
INPUT button to select DV. (See page 41)
Press the REC MODE button repeatedly,
4
(or press the REC MODE button, then
press the ...† button) to select the
recording speed(quality).
SP LP EP
Record Mode SP (02:12)
40
- English
L1 L2 DV
XP
5 Press the REC button.
To pause recording
Press the button to pause a recording in progress.
Press the button again to resume
recording.
You can switch channels by pressing the
( / )
buttons while recording pauses.
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
When using DVD-RAM/DVD-RW/DVD-R discs, the
message 'Updating the information of disc.
Please wait for a moment' is displayed.
You can not change the recording mode
and input source while recording or
NOTE
Pause.
Recording will stop automatically if
there is no free space left for recording.
Up to 99 titles can be recorded onto a
disc.
Recording will stop automatically if a
copy protected image is selected.
DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
Do not use DVD-R authoring discs with
this unit.
PROG