Recording The Current Tv Programme You Are Watching; Recording From External Equipment You Are Watching - Samsung DVD-SH893 User Manual

recording

recording the current TV programme you are watching

1. Press the PrOg (
programme you want to record.
. Press the rEC MODE button repeatedly, (or press the rEC
MODE button and then press the ▲▼ buttons) to select the
recording speed(quality).
 SP  LP  EP  XP
. Press the rEC button.
Information concerning the channel is displayed on the screen,
then recording begins.
Icon(! rEC) is displayed on the front panel.
M
`
The REC mode is disabled in the DTV.

recording from external equipment you are watching

1. Press the SOUrCE button to select the input source according to the connection you made.
The front panel display changes in the following sequence:
 Pr number  aV1  aV2  aV3  DV
If you connect a digital camcorder, press the SOUrCE button to select DV. (See page 77)
. Press the rEC MODE button repeatedly, (or press the rEC MODE button, then press the ▲▼ buttons)
to select the recording speed (quality).
. Press the rEC button.
Information concerning the external input mode is displayed on the screen, then recording begins.
Icon(! rEC) is displayed on the front panel.
To pause recording
Press the rEC PaUSE button to pause a recording in progress.
~
Press the rEC PaUSE button again during pause to resume recording.
~
You can switch channels by pressing the PrOg (
~
broadcasting only)
If you select DV mode during rec pause, recording will be stopped.
~
If you change the input source during rec pause in DV mode, recording will be stopped.
M `
In DTV mode, if you press the REC PAUSE button:
- The channel will not be switched and the TV/RADIO key is disabled.
- Switching to the analog channel or changing the input source will be applied after the recording is stopped.
`
In ANALOG mode, if you press the REC PAUSE button:
- Switching to DTV mode will be applied after the recording is stopped.
To stop recording
Press the STOP (
When using DVD-RAM/±RW/±R discs, the message "Updating the information of disc. Please wait for a
~
moment" is displayed.
_ recording
) or number buttons to select the current
) button to stop or finish a recording in progress.
Record Mode
HDD
●
Recording:
PR 1 [SP]
) buttons while recording pauses. (Analogue
SP(35:12)