Setting Up The Progressive Scan; Canceling The Progressive Scan - Samsung DVD-R121 Instruction Manual

Setting up the Progressive
scan
If the TV supports Progressive Scan, press the
P.SCAN button on the front of the DVD Recorder to
enjoy.
1 With the unit in Stop mode, press the
P.SCAN button on the front of the DVD
Recorder.
The message "Press [Yes] to confirm Progressive
scan mode. Otherwise press [No]" will appear.
Press the œ √ buttons to select Yes, and then press
the OK button.
Press [Yes] to confirm Progressive scan mode.
Otherwise press [No]
2 The message "Please set your TV to
Progressive input. To deactivate, press
[STOP] key." will appear. Press the OK
button.
Please set your TV to Progressive input.
To deactivate, press [STOP] key.
3 The message "Video Output Mode
Progressive Scan" will appear.
Progressive setting is only available when
the DVD Recorder is connected to your
NOTE
TV using component cables.
If the P.SCAN button on the DVD recorder's
front panel is pressed during playback, the
message "This function is possible only on
stop mode." appears on the screen.
Progressive setting is only available when
the DVD recorder is in stop mode.
32
- English
Yes No
OK
Video Output Mode
Progressive Scan
Canceling the Progressive
scan
1 With the unit in Stop mode, press the
P.SCAN button on the front of the DVD
Recorder.
The message "Press [Yes] to confirm Interlace scan
mode. Otherwise press [No]" will appear.
Press the œ √ buttons to select Yes, and then press
the OK button.
Press [Yes] to confirm Interlace scan mode.
Otherwise press [No]
Yes
2 The message "Please set your TV to
Interlace input. To deactivate, press [STOP]
key." will appear. Press the OK button.
Please set your TV to Interlace input,
To deactivate, press [STOP] key.
OK
The message "Video Output Mode Interlace
3
Scan" will appear.
Video Output Mode
Interlace Scan
Do not press the P.SCAN button if you
are using a TV that does not support
NOTE
Progressive mode. Nothing will be
displayed on the screen if pressed.
If you press the P.SCAN button by
mistake when your TV does not support
Progressive mode, you need to release
the Progressive mode. To release the
Progressive mode, press the P.SCAN
button on the front panel 3 times. The
screen will recover after the PSO LED on
the front panel display turns off.
No