Samsung DVD-R121 Instruction Manual
Samsung dvd-r121 dvd recorder instruction manual
Hide thumbs
Also See for DVD-R121:
- Instruction manual (366 pages) ,
- Manual de instrucciones (89 pages) ,
- Quick setup manual (4 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung DVD-R121
Summary of Contents for Samsung DVD-R121
- Page 1 Instruction Manual DVD-R121 AK68-00696A-00...
-
Page 2: Warning
MPORTANT NOTE Warning The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used. -
Page 3: Precaution
Exterior interference such as lightning and static Precaution electricity can affect normal operation of this recorder. If this occurs, turn the recorder off and on again with the STANDBY/ON button, or disconnect and then reconnect the AC power cord to the AC power outlet. The recorder will operate normally. -
Page 4: Disc Storage
This unit can play back DVD-R discs recorded and ISO9660 or JOLIET format can be played back finalised with a Samsung DVD video recorder. It may Only MP3 files with the ".mp3", ".MP3" extension can not be able to play some DVD-R discs depending on be used. - Page 5 A DVD-RW blank disc is initialized to VR Mode when Use of poor quality DVD-RAM/DVD-RW/DVD-R discs first initialized. may cause following unexpected problems including, without limitation, recording failure, loss of recorded DVD-RW (VR mode) or edited materials or damage to the recorder. - This is a format that is used for recording data on a DVD-RAM or DVD-RW disc.
-
Page 6: Table Of Contents
Other type of connecting the Audio output cable ..19 Contents Case 1 : Connecting to your TV........19 Case 2 : Connecting to a stereo amplifier with AV output jacks..........20 Case 3: Connecting to an AV amplifier with a digital output jack ............20 Getting Started Getting Started Connecting to LINE 2 IN, DV input jack....21... - Page 7 Recording Recording Using Markers ..............56 Playing an Audio CD/MP3 ........57 Before Recording.............36 Playing an Audio CD (CD-DA)/MP3 .......57 Recordable discs..............36 Playing a Picture ............61 Recording Formats ............37 Playing a MPEG4 .............62 Recording Mode...............37 Playing the Title List..........63 Unrecordable video............37 Editing About INFO Key...............38 Editing Checking the available disc space (Disc Information)...38...
-
Page 8: General Features
High quality progressive scan General Features Progressive scanning provides high resolution and flicker free video. The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry provides the highest image playback and recording quality. (See pages 19, 32) The DVD Recorder allows you to record and play high A variety of functions with an easy-to-use user quality digital video on DVD-RAM/DVD-RW/DVD-R interface... -
Page 9: Before Reading The User's Manual
It should be noted that All rights reserved; No part or whole of this user’s the disc's data will be lost when manual may be reproduced or copied without the prior changing formats. written permission of Samsung Electronics Co. English -... - Page 10 Step 3 Step 6 Recording Finalising & Playing on other DVD components There are two different recording methods, Direct To play your DVD on other DVD components, Recording and Timer Recording. Timer recording is finalising may be necessary. First, finish all editing and classified as a Date : Once(dd/mm(MON)), Every Day, recording operations, then finalise the disc.
-
Page 11: Unpacking
Unpacking Accessories Setting the Remote Control Check for the supplied accessories below. You can control certain functions of another manufacturer’s TV with this remote control. Control function buttons involve: STANDBY/ON, PROG , TV VOL +/-, Direct Number buttons, TV MUTE, INPUT button. Video/Audio Cable RF Cable for TV Batteries for Remote... - Page 12 TELEAVA Controllable TV Codes TELEFUNKEN 67, 73, 75, 76 BRAND BUTTON THOMSON 72, 73, 75 SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09 THOMSON ASIA 80, 81 AIWA TOSHIBA 47, 48, 49, 50, 51, 52 ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 WEGA BANG &...
-
Page 13: Description
Description Front panel 1. STANDBY/ON 7. DISPLAY Turns the recorder on and off. Displays the playing status, title/ chapter/ time, etc. 2. LINE 2 INPUT 8. SEARCH/SKIP Connect external equipment. Goes to the next title/chapter/track or goes back to the previous title/chapter/track. 3. -
Page 14: Rear Panel
Rear Panel The fan always revolves when the power is on. Ensure a minimum of 10cm clear space on all sides of the fan when installing the product. 1. DIGITAL AUDIO OUT(OPTICAL) 6. COMPONENT VIDEO OUT(best video quality) Connects to an amplifier having a digital optical Connects to equipment having Component video audio input jack. -
Page 15: Tour Of The Remote Control
Tour of the Remote Control 10. MENU Button Brings up the DVD recorder’s setup menu. 11. OK/DIRECTION Buttons (… … / † † / œ œ / √ √ Buttons) 12. REC MODE Button This will display the recording status.(XP/SP/LP/EP) 13. -
Page 16: Connecting & Setting Up
Quick Overview Connecting A Quick Overview presented in this guide will give you enough information to start using the recorder. & Setting Up Connecting the DVD-Recorder This section involves various methods of connecting the DVD Recorder to other external † components and required initial setting modes. -
Page 17: Connecting The Dvd-Recorder
Connecting the DVD- Other type of connecting Recorder the Video output cable There are several ways to output video signal. 1. Disconnect the aerial cable from your TV and Select one of the following video connecting that best connect it to on the rear panel of the DVD - suits you below. -
Page 18: Case 1 : Connecting To A Video (Composite)
Case 1 : Connecting to a Video Case 2 : Connecting to an (Composite) output jack S-Video output jack 1. Connect a video(yellow) cable between the VIDEO 1. Connect an S-Video cable (not included) between the (yellow) OUT jack on DVD Recorder and VIDEO S-VIDEO OUT jack on DVD Recorder and S-VIDEO (yellow) INPUT jack on your TV (or AV amplifier). -
Page 19: Case 3 : Component Video Output Jacks
Case 3 : Component Video Other type of connecting output jacks the Audio output cable 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y,P ) jacks on DVD Recorder and COMPONENT IN(Y,P ) jacks on your TV. 2. Connect audio cables (white and red) between the There are several ways to output audio signal. -
Page 20: Case 2 : Connecting To A Stereo Amplifier
Case 2 : Connecting to a stereo Case 3: Connecting to an AV amplifier with AV output jacks amplifier with a digital output jack If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks. If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection. -
Page 21: Connecting To Line 2 In, Dv Input Jack
Case 2 : Connecting a Connecting to LINE 2 IN, Camcorder the DV IN jack DV input jack If your digital camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder. This allows you to connect your DVD Recorder to other external devices and view or record their outputs. -
Page 22: System Setup
On-Screen Menu Navigation System Setup The on-screen menus allow you to enable or disable various functions on your DVD Recorder. Use the following buttons to open and navigate through the on-screen menus. No Disc DVD-RAM(VR) Timer Record Disc Navigation Programme Timer Record Disc Navigation Title List... -
Page 23: Plug & Auto Set Up
Auto Channel scan will be started. Plug & Auto Set up Channel scan Now, Scanning. Your DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. -
Page 24: Setting The Clock
Setting the Clock Presetting Channels with the Auto Setup function This menu is used to set the current time. This feature allows you to manually set the DVD You need to set the time to use timer recording. Recorder tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. -
Page 25: Presetting Channels With The Manual Setup Function
Press the …† buttons to select Auto Presetting Channels with Setup, then press the OK or √ button. The message “Your data will be lost.Press [OK] to the Manual Setup function continue, [MENU] to exit.” is displayed. No Disc Install You can add preset channel that Auto Channel Search Programme Auto Setup... -
Page 26: Setting Up The Language Options
Press the …† buttons to select Manual Setting up the Language Setup, then press the OK or √ button. Options No Disc Manual Setup Name Edit - - - - - - - √ √ - - - - - - - √... -
Page 27: Ep Mode Time Setting
Press the …† buttons to select the desired EP Mode Time Setting language option, then press the OK or √ button. Audio Language: For the speaker sound. Subtitle Language: For the disc subtitles. Disc Menu Language: For the disc menu contained on the disc On-Screen Menu Language: For the Player Menu You can select one of four recording modes by pressing... -
Page 28: Automatic Chapter Creation
Press the …† buttons to select On or Off, Automatic Chapter then press the OK or √ button. • Off: Select this option when you do not want Creation (Automatic Chapter Creation). • On: Select this option when you want (Automatic Chapter Creation). -
Page 29: Setting Up The Front Display Options
Press the …† buttons to select Front Setting up the Front Display, then press the OK or √ button. Display Options No Disc System Programme EP Mode Time : 6Hours √ √ Chapter Creator : Off √ √ Setup Front Display : Bright Bright √... -
Page 30: Setting Up Nicam Options
Press the …† buttons to select NICAM, Setting up NICAM Options then press the OK or √ button. No Disc System Programme EP Mode Time : 6Hours √ √ Chapter Creator : Off √ √ Setup Front Display : Bright √... -
Page 31: Setting Up The Audio Options
Setting up the Audio Press the …† buttons to select the desired item, then press the OK or √ button. Options Press the RETURN or œ button to return You can connect the DVD Recorder to an external amp to the previous menu. NOTE or Home Theater. -
Page 32: Setting Up The Progressive Scan
Setting up the Progressive Canceling the Progressive scan scan If the TV supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder to With the unit in Stop mode, press the enjoy. P.SCAN button on the front of the DVD Recorder. -
Page 33: Setting Up The Display(Video) Options
Setting up the Press the RETURN or œ button to return to the previous menu. Press the MENU NOTE Display(Video) Options button to exit the menu. Display(Video) Options This function allows you to setup the TV screen settings. This function depends on disc type. It may not work for some disc types. -
Page 34: Setting Up The Parental Control
Press the OK or √ button to select Setting up the Parental Password. Control No Disc Parental Control Programme Password :Off √ √ Setup The Parental Control function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. -
Page 35: About The Rating Level
About the Rating Level About the Change Password Press the …† buttons to select Rating Press the …† buttons to select Change Level. Password. No Disc Parental Control No Disc Parental Control Programme Password : On √ √ Programme Password : On √... -
Page 36: Before Recording
This section shows various DVD recording This recorder can record on the following discs. methods. DVD-RAM DVD-RW DVD-R DVD-RWs and DVD-RAMs are rewritable. DVD-Rs are non-rewritable Compatibility between Samsung and Other Company’s Recorder Disc Types Recording Recording Finalising Additional Recording in format Device... -
Page 37: Recording Formats
Recording Formats Mode Characteristic Recording Times Data Rates Since available functions differ depending on the disc Select when the Approx. 1 hour type, select a disc that best fits your preferences; When you insert an unused disc, the following message (high quality mode) video quality is about 8 Mbps appears... -
Page 38: About Info Key
About INFO Key Recording the current TV programme you are watching Before you start The INFO function allows you to view the current status and progress of playback and recording. Depending on Check that the disc has enough available space for the the disc type and status, the displayed screen may be recording. - Page 39 To stop recording Press the PROG ( / ) or number ~ ) buttons to select the current Press the STOP ( ) button to stop or finish a programme you want to record. recording in progress. When using DVD-RAM/DVD-RW/DVD-R discs, the message ‘Updating the information of disc.
-
Page 40: Recording From External Equipment You Are
Press the REC button. Recording from external equipment you are watching To pause recording Press the button to pause a recording in progress. Press the button again to resume recording. PROG You can switch channels by pressing the Before you start ( / ) buttons while recording pauses. -
Page 41: Copying From A Camcorder
Select the Play icon on the upper part of the Copying from a screen to playback the camcorder and find the starting position to copy. Camcorder You can press the PLAY button of the remote control to play the camcorder. To start recording, use the œ... -
Page 42: Making A One Touch Recording (Otr)
To view the current status of the disc and progress Making a One Touch of recording : Press the INFO button, and information about the disc will appear. Recording (OTR) DVD-RAM(VR) Disc Info Disc Name Total Title Total Playlist Recordable Time 02:12 SP Protection Not Protected Screen... -
Page 43: Making A Timer Recording
• Source : The video input source (L1, L2 or DV), Making a Timer Recording or the broadcasting channel you want to make a timer recording from. • Date : Timer Recording allows setting the recording time within one month period. Set the recording day. -
Page 44: Flexible Recording (For Timer Recording Only)
Press the OK button. Editing the Scheduled will appear on the front panel. It means that a timer recording is registered. Record List If the timer settings overlap The programmes are recorded in order of priority. If timer recording is set for the first programme and then again for the second programme and both programmes overlap, the following message will appear on the screen: “This setting is identical... -
Page 45: Deleting The Scheduled Record List
Press the …† buttons to select Edit, then Press the RETURN button to close the press the OK or √ button. Timer Recording screen. The Timer Record Input item is displayed. Edit the items you want to modify. DVD-RAM(VR) Scheduled Record List See the “Making a Timer Recording”... -
Page 46: Recording The Standard Timer List
Recording the Standard Timer List When the start time in the Scheduled record list reaches while the set is in power off, the set will be powered on and start the recording automatically. To stop Recording Press the STOP( ) button, and a message that asks whether to end recording or not will be displayed. -
Page 47: Playback
Before Playing Playback Read the following information before playing a disc. Region code (DVD-Video only) Both the DVD recorder and the discs are coded by region. These regional codes must This section introduces basic functions of playback match in order for the disc to play. If the codes do not match, the disc will not play. -
Page 48: Playing A Disc
Place a disc gently into the tray with the This DVD recorder can only operate with disc’s label facing up. discs that are compatible with DVD-RAM NOTE Standard Version 2.0. Playback and/or recording may not work Press the OPEN/CLOSE button to close for some types of discs, or when specific the disc tray. -
Page 49: Using The Disc & Title Menu
Using the Search Functions Using the Disc Menu & Title Menu Some discs contain a dedicated menu system that allow you to select special functions for the title, such as chapters, audio tracks, subtitles, film previews, information on characters, etc. For DVD-VIDEO discs Press the DISC MENU button to enter the disc menu of the disc. -
Page 50: Slow Motion Play
About ANYKEY Skipping Chapters or Tracks During play, you can search quickly through a chapter or track. During play, press the SKIP ( button on the remote control. If you press the œœ button, it moves to the beginning of the chapter or track or The ANYKEY function allows you to easily search for a marker(DVD-RAM, DVD-RW(VR mode)). -
Page 51: Using The Repeat Function
If you want to move to a desired time to Using the Repeat Function help you find a scene. Press the ANYKEY button during playback. DVD-VIDEO Title 1/10 1/40 Chapter Time 00:01:45 Subtitle Audio D 5.1CH Repeat Angle Zoom Playing Repeatedly(Repeat Playback) MOVE CHANGE Press the …†... - Page 52 Press the REPEAT button repeatedly to select Track or Disc you want to play Using the ANYKEY button Using the ANYKEY button repeatedly. Music Press the ANYKEY button during Repeat : Track Play Option : Normal playback. 01. TRACK 1 00 : 52 01.
-
Page 53: Selecting The Subtitle
Selecting the Subtitle Playing a Certain section Repeatedly(A-B Repeat Playback) Subtitle languages may not work depending on the disc type. This is only available during playback. (VR mode) Using the ANYKEY button Using the ANYKEY button Using the SUBTITLE button Using the SUBTITLE button Press the ANYKEY button during Press the SUBTITLE button during... -
Page 54: Selecting The Audio Language
Selecting the Audio language Changing the Camera Angle Audio languages may not work depending on the disc When a DVD-VIDEO contains multiple angles of a type. This is only available during playback. particular scene, you can select the Angle function. This is only available during playback. -
Page 55: Zooming-In
Zooming-In Using Bookmarks This feature lets you bookmark sections of a DVD-VIDEO or DVD-R/-RW(V mode), so you can quickly find them. Press the ANYKEY button during playback or pause. (V mode) DVD-VIDEO Press the MARKER button during 1/10 Title playback. 1/40 Chapter Time... -
Page 56: Using Markers
Using Markers Playing back a bookmark Press the MARKER button during (VR mode) playback. Press the MARKER button during playback. Press the œ √ buttons to select a bookmarked scene. Marker Bookmark RETURN MOVE PLAY CANCEL RETURN Press the OK button when the desired Press the OK or button to start scene appears. -
Page 57: Playing An Audio Cd/Mp3
Playing back a Marker Playing an Audio CD/MP3 Press the MARKER button during playback. Playing an Audio CD (CD-DA)/MP3 Press the œ √ buttons to select a Each disc has a variety of menu functions available. bookmarked scene. Marker Playing an Audio CD(CD-DA) MOVE PLAY CANCEL... - Page 58 Buttons on the Remote Control used for Audio CD(CD-DA) playback Playing an MP3 Disc Insert an MP3 Disc into the disc tray. Disc Navigation Disc Navigation DivX √ √ Photo √ √ Programme Music √ √ Setup MOVE RETURN EXIT Press the …†...
- Page 59 Buttons on the Remote Control used for MP3 playback MP3 Screen Elements Music Repeat : Off Play Option : Normal Straight from the heart 00 :22 ROOT Bryan Adams Bryan Adams_2 Straight from the heart ROOT Run to you 03/06 Heaven MOVE RETURN...
- Page 60 Play Option Mode To Programme Tracks The Play Option can be used with an audio CD or MP3 You can register a maximum of 30 tracks in the playlist. in the Play or Stop mode. Press the ANYKEY button during playback. Repeat Mode will be highlighted.
-
Page 61: Playing A Picture
-1 If your press the PLAY( ) button, the Playing a Picture Slide show screen will appear. Press the œ √ buttons to set the slide show speed, then press the OK button. Slide Show Speed DSC01189 Insert a JPEG into the disc tray. MOVE RETURN Disc Navigation... -
Page 62: Playing A Mpeg4
MPEG4 Function Description Playing a MPEG4 Function Description During play, press the button, it moves Skip forward or backward 5 minutes. During play, press the SEARCH ( ) button Search and press again to search at a faster speed. (2X, 4X, 8X) MPEG4 File is used to contain the audio and video data. -
Page 63: Playing The Title List
Press the …† buttons to select Disc Playing the Title List Navigation, then press the OK or √ button twice. The Title List screen is displayed. DVD-RAM(VR) Title List No. Title Length Edit 01 19/APR/2005 1 00:00:21 √ √ 02 19/APR/2005 1 00:00:03 √... - Page 64 Press the INFO button once again. Then you can Title List Screen Elements check the information about the title under playback. DVD-RAM(VR) Playing Info Name 01/JAN/2005 12:00 PR Title 1/15 Created Time 01/JAN/2005 12:00 DVD-RAM(VR) DVD-RAM(VR) Title List Title List Length 00:01:43 SP No.
-
Page 65: Editing
Editing This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Title List A title is a section of recorded video and audio. Title List shows a list to help you select a title. Since the title list consists of the information on stream that is actually recorded, if one title is deleted, that title cannot be played again. -
Page 66: Basic Editing (Title List)
Press the …† œ √ buttons to select the Basic Editing (Title List) desired characters, then press the OK button. DVD-RAM(VR) Rename Sports(A1) A B C D E a b c d e f g h i Renaming(Labeling) a Title F G H I J K L M N O k l m n o... -
Page 67: Locking(Protecting) A Title
Locking(Protecting) a Title Press the œ √ buttons to select On, then press the OK button. The key icon on the Follow these instructions to lock an entry to protect it information window for the selected entry from accidental deletion. changes to the locked status. -
Page 68: Deleting A Section Of A Title
Press the …† buttons to select Delete, Deleting a Section of a Title then press the OK or √ button. Follow these instructions to delete a section of a Title List entry. DVD-RAM(VR) Title List (VR mode) No. Title Length Edit 01 Drama 00:00:21 √... - Page 69 Press the OK button at the starting point. Press the OK button to select the Delete. The image and starting point time are displayed in the section deletion starting point window. DVD-RAM(VR) Edit Title List Title List No. 05 Start DVD-RAM(VR) Edit Title List Title List No.
-
Page 70: Advanced Editing (Playlist)
Press the OK button at the end point. Advanced Editing (Playlist) DVD-RAM(VR) Make Scene Scene No. 001 Start Start 00:00:10 Title List: 1/6 Creating a Playlist 00:10:00 Make New Playlist Return 19/APR/04 12:00 Follow these instructions to create a new playlist entry 00:10:00 from a recorded title. -
Page 71: Playing Entries In The Playlist
Playing Entries in the Playlist Press the …† buttons to select Play, then select the OK button. Follow these instructions to play the playlist entries. The playlist entries will be played. DVD-RAM(VR) Edit Playlist (VR mode) No. Title Length Edit 01 23/APR/2005/0 00:00:21 √... -
Page 72: Renaming A Playlist Entry
Renaming a Playlist Entry Enter the desired characters using the …† œ √ buttons. Follow these instructions to rename a playlist entry, i.e. to edit the title of a playlist entry. DVD-RAM(VR) Rename Dolphin (VR mode) A B C D E a b c d e f g h i F G H I J... -
Page 73: Editing A Scene For The Playlist
Editing a Scene for the Playlist Playing a Selected Scene Follow these instructions to edit scenes for a playlist. Press the …† œ √ buttons to select the scene you want to play, then press the OK (VR mode) button. The playlist entry to be played is selected. - Page 74 Press the OK button at the end point of the Modifying a Scene (Replacing a Scene) scene. To setup, follow steps 1 to 3 in page 73. DVD-RAM(VR) Modify Scene Scene No. 002 Start Press the …† œ √ buttons to select the Start 00:00:25 scene you want to modify, then press the...
- Page 75 Moving a Scene (Changing the Position of a Scene) You cannot move the selected scene to the position of the next scene, because the NOTE selected scene should be inserted before that position, which requires no action. To setup, follow steps 1 to 3 in page 73. Depending on the kind of disc, the displayed Press the …†...
-
Page 76: Copying A Playlist Entry To The Playlist
Press the OK button at the end point of the Copying a Playlist Entry to the scene. Playlist DVD-RAM(VR) Add Scene Scene No. 004 Using the PLA LIST button Using the PLA LIST button Start Start 00:00:15 00:00:35 Sclence With the unit in Stop mode, press the Cancel APR/23/2005 06:43 AM 00:00:35... -
Page 77: Deleting A Playlist Entry From The Playlist
Press the …† buttons to select Delete, You can create up to 999 scenes on one then press the OK button. disc. In some cases, this may be different NOTE from the actual numbers. Press the MENU button after the DVD-RAM(VR) Edit Playlist operation has finished. -
Page 78: Disc Manager
Enter the desired characters press the …† Disc Manager œ √ buttons. DVD-RAM(VR) Rename Disc A B C D E a b c d e f g h i F G H I J Editing the Disc Name K L M N O k l m n o p q r s t P Q R S T... -
Page 79: Disc Protection
Disc Protection Formatting a Disc Disc Protection allows you to protect your discs from Use these instructions to format a disc. being formatted or deleted due to unintended The disc protect should also be cleared. operations. With the unit in Stop mode, press the With the unit in Stop mode, press the MENU button. -
Page 80: Delete All Title Lists
Press the …† buttons to select Disc DVD-RW Manager, then press the OK or √ button. You will be prompted with the confirmation message ‘Choose the recording format for DVD- RW.’ DVD-RAM(VR) Disc Manager Disc Navigation Disc Name √ √ DVD-RW(VR) Disc Manager Disc Protection... -
Page 81: Finalising A Disc
Finalising a disc You will be prompted with the message 'Do you want to finalise disc?'. After you record titles onto a DVD-RW/DVD-R disc with your DVD recorder, it needs to be finalised before it can be played back on external devices. DVD-RW(VR) Disc Manager Disc Name... -
Page 82: Unfinalising A Disc (V/Vr Mode)
Unfinalising a disc (V/VR mode) Press the œ √ buttons to select Yes, then press the OK button. The disc is unfinalised. With the unit in Stop mode, press the MENU button. A DVD-RW can be finalised or unfinalised in Video mode. NOTE DVD-RW(VR:F) Disc Navigation... -
Page 83: Additional Information
Troubleshooting Additional If your product malfunctions, go through the check- points below before contacting a Samsung authorised Information service centre. Power The input is displayed for a while when the power is turned on. The DVD recorder requires some time... - Page 84 Playback The angle operation does not work while playing a DVD disc. Cannot play the disc. The angle operation is available only Checkpoint 1 when the disc contains images Check whether the disc is inserted Checkpoint 1 captured from different angles. correctly with the label facing up.
-
Page 85: Timer Recording
Video Timer Recording The disc revolves, but no image or bad quality Timer lamp flickers. images are displayed. Check there is enough space in the Checkpoint 1 Be sure that the Video Setting is Checkpoint 1 disc for recording. properly set. (See page 33). Check whether the current disc is Checkpoint 2 Check whether there is damage to or... -
Page 86: Remote Control
Allow for proper distance. Remove obstacles between your DVD recorder Checkpoint 3 If the problem still persists, contact a and the remote control. nearby Samsung service centre. Check whether the batteries are empty. Checkpoint 2 Check for the TV or DVD button. Checkpoint 3 Other I forget my password for parental supervision. -
Page 87: Specifications
Specifications Power requirements AC 110~240V, 50/60Hz Power consumption 35 Watts Weight 2.9Kg General Dimensions 430mm(W) x 250mm(D) x 59mm(H) Operating temp. +5°C to +35°C Other conditions Keep level when operating. Less than 75% operating humidity Composite Video : 1.0 V p-p at 75Ω load, sync negative Video Max.Audio Input Level : 2Vrms Audio... - Page 88 AK68-00696A-00...