Remote Control - Samsung DVD-R121 Instruction Manual

Remote Control

The remote control doesn't work.
Point the remote control at the remote
Checkpoint 1
control sensor on your DVD recorder.
Allow for proper distance. Remove
obstacles between your DVD recorder
and the remote control.
Check whether the batteries are empty.
Checkpoint 2
Check for the TV or DVD button.
Checkpoint 3
Other
I forget my password for parental supervision.
Press the
Checkpoint 1
the Recorder for more than 5 seconds with
no disc in the unit. All settings including the
password will revert to the factory settings.
Do not use this unless absolutely
necessary. (Note that this function is
possible only when no disc is inserted.)
Is it possible to change a subtitle and an audio sig-
nal on a recorded disc?
A recorded disc is played with only the
Checkpoint 1
subtitle and the audio signal which
were selected during recording.
86
- English
button on the front panel of
Other problems.
Read the table of contents and then
Checkpoint 1
find and read the section describing
your problem, follow the instructions
given.
Checkpoint 2 Turn your DVD recorder off and on.
Checkpoint 3 If the problem still persists, contact a
nearby Samsung service centre.