Recording From External Equipment You Are; Watching; Copying From A Camcorder - Samsung DVD-R145 Instruction Manual

Recording from external
equipment you are

watching

Before you start
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
2 Press the OPEN/CLOSE button to close
the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD±RW/+R disc is used, whether to
initialize or not will be asked first. (See page 41)
3 Press the INPUT SEL. button to select the
input source according to the connection
you made.
The front panel display changes in the following
sequence:
➞ ➞
PR Number
If you connect a digital camcorder, press the
INPUT SEL. button to select DV.
(See pages 44-45)
4 Press the REC MODE button repeatedly,
(or press the REC MODE button, then
press the ...† button) to select the
recording speed(quality).
➞ ➞ ➞
SP LP EP
Record Mode
44
- English
➞ ➞ ➞
AV1 AV2 AV3 DV
➞
XP
SP (02:12)
5 Press the REC button.
To pause recording
Press the PLAY/PAUSE(
recording in progress.
Press the PLAY/PAUSE(
●
recording.
You can switch channels by pressing the
●
( / )
buttons while recording pauses.
To stop recording
Press the STOP button to stop or finish a recording in
progress.
When using DVD-RAM/DVD ± RW/DVD ± R discs, the
●
message "Updating the disc information. Please wait
for a moment." is displayed.
You can not change the recording mode
■
while recording or Pause.
NOTE
Recording will stop automatically if
■
there is no free space left for recording.
Up to 99 titles can be recorded onto a
■
DVD-RAM/-RW/-R disc, and up to 48
titles onto a DVD+RW/+R disc.
Recording will stop automatically if a
■
copy protected image is selected.
DVD-RAM/DVD±RW/DVD+R discs
■
must be formatted before starting to
record.
Most new discs are sold unformatted.
Do not use DVD-R authoring discs with
■
this DVD Recorder.
Copying from a
Camcorder
You may control the Camcorder using the IEEE1394
(DV) interface.
Before you start
Check that the disc has enough available space for
the recording. Adjust the recording mode.
Press the OPEN/CLOSE button, place a
1
recordable disc on the disc tray.
) button to pause a
) button again to resume
PROG