Using The Bkw-401 Viewfinder Rotation Bracket - Sony PMW-500 Operation Manual

Viewfinder left-to-right positioning ring
Viewfinder front-to-back positioning knob
Using the BKW-401 Viewfinder
Rotation Bracket
By fitting an optional BKW-401 Viewfinder
Rotation Bracket, you can rotate the viewfinder
out of the way so that your right leg does not hit
the viewfinder while you are carrying the
camcorder.
1
Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2
Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly.
Viewfinder slide assembly
3
Attach the BKW-401 with the supplied
bolts.
Bolts supplied with the BKW-401
Attaching the Viewfinder
Bolts with
hexagonal
hole
35