Note About The Battery Terminal - Sony PMW-500 Operation Manual

Solid-state memory camcorder
Hide thumbs Also See for PMW-500:
Table of Contents

Advertisement

3
Remove the protecting filter, together
with the packing ring, from inside the
eyecup holder.
4
Detach the protecting filter from the
packing ring.
Fog-proof filter
Depending on the temperature and humidity, the
protecting filter may mist because of vapor or
your breath. To ensure that the viewfinder is
always clear, replace the protecting filter with a
fog-proof filter (service part number: 1-547-341-
11).
Fitting the fog-proof filter
Replace the protecting filter on the packing ring
with the fog-proof filter.
Be sure to correctly assemble the fog-proof filter,
the packing ring, and the eyecup so that the
reassembled eyepiece is waterproof.
Note
When cleaning the fog-proof filter, wipe it very gently
with a soft cloth to avoid damaging the anti-fogging
coating.

Note about the Battery Terminal

The battery terminal of this unit (the connector for
battery packs and AC adaptors) is a consumable
part.
Power may not be supplied to the unit properly if
the pins of the battery terminal are bent or
deformed by shock or vibrations, or if they
become corroded due to prolonged outdoor use.
Periodic inspections are recommended to keep
the unit working properly and to prolong its
usable lifetime.
Contact a Sony service or sales representative for
more information about inspections.
Maintenance
153

Advertisement

Table of Contents
loading

Table of Contents