Intel STL2 Troubleshooting Manual page 19

**** Diagnostics. Ver 1.0
(c)Copyright 2000 Intel Corp. All Rights Reserved.
Server Diagnostic Options
Quick Test
Comprehensive Test (DEFAULT)
Comprehensive Test with continuous looping
Display Help Text
EXIT
Highlight your selection using Cursor UP/DOWN and press ENTER
On entry the "Comprehensive Test" option is highlighted, as the default.
Selecting any of the first three options results in the test system probing the hardware to determine which
tests in the suite are applicable to the current hardware configuration. If the system under test is not an
supported by the diagnostics package being used, the message "This motherboard is not supported by these
diagnostics. Press any key to exit" will appear.
Selecting the "Display Help Text" option results in a display of the help text file for the test options.
Selecting the "EXIT" option saves the test results in a RESULT.LOG file and returns you to the DOS
prompt. Typing "testmenu" (without the quotes) at the prompt will restart the menu system.
Select the test desired with the cursor and press <ENTER>. The hardware configuration test will begin and
upon completion, a configuration summary will be displayed.
Below is an example of the hardware configuration results for the "Comprehensive "Test." The results for
the "Quick Test" are similar, yet not as detailed.
3