Setting The Zero Memory - Samsung VP-D651 Owner's Instruction Book

ENGLISH
Basic Recording

Setting the Zero Memory

✤ The Zero Memory function works in both Camera and Player modes.
✤ You can mark a point on a tape that you want to return to following
playback.
1. Set the Power switch to CAM or PLAY.
2. Set the Mode switch to TAPE.
(VP-D653(i)/D655(i) only)
3. Press the ZERO MEMORY button on the remote
control before the recording or during playback
at the point where you wish to return.
I The time code is changed to a tape counter
that is set to Zero Memory with the
0:00:00 (Zero Memory indicator).
I If you want to cancel the Zero Memory function,
press the ZERO MEMORY button again.
4. Finding the zero position.
I
When you have finished playback, fast
forward or rewind the tape in stop mode.
The tape stops automatically when it reaches
the zero position.
I When you have finished recording, set the
Power switch to PLAY and press the
button.
The tape stops automatically when it reaches the zero position.
5. The tape counter with the
on the screen and the tape counter is changed to the time code.
[ Notes ]
I In the following situations, Zero Memory mode may be canceled
automatically:
- At the end of the section marked with the Zero Memory
function.
- When the tape is ejected.
- When you remove the Battery pack or power supply.
I The Zero Memory may not function correctly where there is a
42 42
break between recordings on the tape.
1
(REW)
(Zero Memory indicator) disappears
✤
Camera
Memory
✤
1.
2.
(
3.
I
I
MEMORY
4.
œ
I
I
5.
I
-
-
-
I
Player
CAM PLAY
TAPE
VP-D653(i)/D655(i))
ZERO MEMORY
0:00:00
PLAY
Zero
ZERO