Samsung VP-D651 Owner's Instruction Book page 78

ENGLISH
IEEE1394 Data Transfer
System Requirements
I CPU: faster Intel ® Pentium III™ 450MHz compatible.
I Operating system: Windows
I Main memory: more than 64 MB RAM
I IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV Connection Cable (VP-D651i/D653i/D655i only)
1. Set the Power switch to PLAY.
2. Set the Mode switch to TAPE.
(VP-D653i/D655i only)
3. Connect the DV cable (not supplied)
from the DV jack of the Camcorder to
the DV jack of the other DV device.
I Make sure that
4. Press the Start/Stop button to begin
REC PAUSE mode.
I PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the
picture.
6. Press the Start/Stop button to start recording.
If you want to pause recording momentarily, press the Start/Stop
button again.
7. To stop recording, press the
[ Notes ]
I When using this Camcorder as a recorder, the pictures that appear
on an external monitor may seem distorted, however recorded
pictures will not be affected.
I Operation is not guaranteed for all the recommended computer
environments mentioned above.
I While transmitting data from the Camcorder to PC at strong
electric field and strong magnetic field, VIDEO signal or AUDIO
signal may transmit with noise.
78 78
® 98SE, ME, XP, Mac OS (9.1~10.2)
is displayed.
(STOP) button.
IEEE1394
I CPU Intel Pentium III™ 450MHz
®
I Windows ® 98SE ME XP Mac OS 9.1 10.2
I
64MB RAM
I IEEE1394 IEEE1394
DV (
1.
2.
(
3.
DV
I
4. Start/Stop /
I PAUSE
5.
6. Start/Stop /
I
7. STOP
I
I
I
VP-D651i/D653i/D655i)
PLAY
TAPE
VP-D653i/D655i)
DV
DV DV
REC PAUSE
DV
Start/Stop
PC