Audio Setup; Subwoofer Output; Switching Display - Kenwood DPX-MP4090 Instruction Manual

Subwoofer Output

Turning the Subwoofer output ON or OFF.
Push the Control knob toward [AM] for at
least 2 seconds.
Each time you press the button, Subwoofer
output switches ON and OFF.
When it is ON, "SubW ON" is displayed.
• You can control this function when <Switching
preout> (page 24) is set to "SWPRE SW".
• You can control this function when "2ZON" of <Audio
Setup> (page 9) is set to "OFF".

Switching Display

Changing the information displayed.
Press the [DISP] button.
Each time the button is pressed the display
switches as shown below.
In Tuner source
Information
Frequency
Station name or Frequency
Character
Clock
In CD & External disc source
Information
Play time
Disc name
Disc title (In External disc source or DPX-
MP4090/S internal CD source)
Track title (In External disc source or DPX-
MP4090/S internal CD source)
Character
Clock
In Audio file source (DPX-MP4090/S)
Information
Play time
Folder name
File name
Song title
Album name
Character
Clock
In Tape source
Information
Play side & Tape counter
Character
Clock
In Auxiliary input source
Information
Auxiliary input name
Character
Clock
In Standby mode
Information
Character & Graphic
Clock & Graphic
Clock
• If the Disc title, Track title, Song title, or Album name
• Album name cannot be displayed in WMA file.
Display
"SNPS"
Display
"DNPS"
"D-Title"
"T-Title"
Display
"Folder"
"File"
"Title"
"Album"
is selected when playing a disc with no such data
recorded, track number and play time are displayed.
11
|
English