Hitachi C 12FSA Technical Data And Service Manual page 51

Cutting accuracy:
[ A direction]
Wood test piece
[ B direction]
Fence mounting
surface
Wood test piece
Accuracy
Angle
0˚
A
45˚
0˚
B
Bevel surface
Note: In the case of bevel cutting, there will be uneven
edges of the cut surface if the surface of workpiece is
rough. Check roughness of workpiece. This is
significant especially for the surfaces of workpiece cut
with a band saw.
Square
[150 x 100 mm (6" x 4")]
Wood test piece
Square
[300 x 200 mm
(12" x 8")]
Wood test piece
δ
0.06 mm (0.0025")
0.085 mm (0.0035")
0.5 mm (0.02")
0.5 mm (0.02")
--- 47 ---
Angle gauge
[150 x 100 mm (6" x 4")]
45˚
Fence mounting
surface
Cut surface
Fig. 80
Square
[300 x 200 mm (12" x 8")]
Fig. 79
Workpiece
Uneven
edges