Hitachi C 12FSA Technical Data And Service Manual page 27

(2) Setting to cut crown moldings at positions
Turn the turn table to the left and set the miter angle as follows:
1
For 45˚ type crown moldings: 35.3˚ ( mark)
For 38˚ type crown moldings: 31.6˚ ( mark)
Tilt the head to the left and set the bevel angle as follows:
2
For 45˚ type crown moldings: 30˚ ( mark)
For 38˚ type crown moldings: 33.9˚ ( mark)
Position the crown molding so that the lower surface (
3
Fig. 41.
Miter angle scale
Fence
Fence
Miter angle scale
Fence
2
Bevel angle
scale
Fence
Base
Turn table
Fig. 38
Table on base
Fig. 39
Bevel angle
scale
Base
Turn table
Fig. 40
Table on base
Fig. 41
and in Fig. 37 (See Fig. 40, tilt the head to the left.):
3
in Fig. 36) contacts the fence as indicated in
B
Miter angle scale
Fence
Fence
Turn table
Fence
--- 23 ---
Bevel angle
scale
Fence
Base
Turn table
Fig. 42
Table on base
Fig. 43
Bevel angle scale
Base
Miter angle scale
Fig. 44
Table on base
Fig. 45