Table of Contents
Advertisement
Hardware Monitoring System
Built-in LM78 hardware monitoring system
•
Monitors power supply voltage and fan speed status
•
IrDA Port
Supports Serial Infrared (SIR) and Amplitude Shift Keyed IR(ASKIR) interface
•
USB Port
Supports two USB ports for future expansion
•
ISAPLUS
Enhance the ISA bus drive capability
•
E2Key™
1Kbit EEPROM (nonvolatile memory)
•
Accepts read/write data by customer's program
•
Stores system ID, password, and critical data on the board
•
Watchdog Timer
Can be set by 1, 2, 10, 20, 110, or 220 second periods
•
Reset or NMI is generated when CPU does not periodically trigger the timer
•
Your program uses hex 043 and 443 to control the watchdog and generate a system reset
•
Flash Disk - DiskOnChip™
100% compatibility with hard disk
•
Supports M-Systems
•
Built-in True FFS Transparent Flash Block Management and Space Reclamation, which
•
allows the use of the Flash Disk with DOS command with no need for any extra software
utility
2 MB to 144 MB
•
ATX Power Supply Function
Connect to the backplanes and /or the ISBC card
•
Power Consumption
+5V/6.8A (Celeron 333 MHz, 512 MB SDRAM), +12V/170mA (maximum), -12V/60mA
•
(maximum)
Features
8
Advertisement
Table of Contents
Need help?
Do you have a question about the SBC-370 and is the answer not in the manual?