Caple CR 1207 Instruction Manual page 45

Burners
They can be removed and washed with soapy water only.
They will remain always perfect if cleaned with products used for silverware.
After cleaning or wash, check that burner-caps and burner-heads are dry before placing
them in the respective housings.
Note: To avoid damage to the electric ignition do not use it when the burners
are not in place.
Correct replacement of the burners
It is very important to check that the burner flame distributor "F" and the cap "C" has been
correctly positioned (see fig. 8.1-8.2) - failure to do so can cause a poor burner flame and/
or damage to the burner and hob.
Check that the electrode "S" (figs. 8.1, 8.3 and 8.6) is always clean to ensure
trouble-free sparking.
Check that the probe "T" (figs. 8.1, 8.3 and 8.6) next to each burner is always
clean to ensure correct operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
The burners become very hot during operation.
Keep children away.
C
F
T
S
Fig. 8.1 Fig. 8.2
45