Download Print this page

Ac Voltage Selection - Sherwood RD-925 Operating Instructions Manual

Advertisement

READ IHIS BTFORE
OPTRATIIIG
YOUR UNII
FOR U.S.A. AND CANADA
Units shipped to the U.S.A. and Canada are
designed for operation on 120 V AC only.
Safety precaution with use of a polarized AC plug.
However, some products may be supplied with a
nonpolarized plug.
CAUTTON : To prevent electric shock, match wide
blade of plug to wide slot, fully insen.
ATTENnON : Pour evitet les choc electriques,
introduire la lame la plug laee de la borne
corrcspondante de la prise et poussre jusqu'au tond.
120v FOn OTHER COUNTRTES
110V/2mV
Units shipped to countries other than the above
countries are equipped with an AC voltage selector
switch on the rear panel. Reter to the tollowing
paragraph for the proper setting of this switch.
AC VOLTAGE SELECTION
This unit operates on 110-220 V AC. The AC voltage
selector switches on the rear Danel are set to the
voltage that prevails in the area to which the unit is
shipped. Before connecting the power cord to your
AC outlet, make sure that the setting position of
these switches match your line voltage. lf not, they
must be set to your voltage in accordance with the
following direction.
AC voltage selector switches
AC 220 V
1 1 0 V
Move switch levers to match your line voltage with a
small screwdriver or other Dointed tool.
FOR AUSTRALIA AND EUFOPE ..220 V23O VE4O V
Units shipped to Auslralia are designed for operation
on 240 V AC only.
To ensure safe operation, the three-pin plug
supplied must be inserted only into a standard three-
pin power point which is effectively earthed through
the normal household wiring. Extension cords used
with the equipment must be three-core and be
correctly wired to provide connection to earth.
lmproper eltension cords are a major cause of
fatalities. The lact that the equipment operates
satisfactorily does not imply that the power point is
earthed and that the installation is completely safe.
For your safety, if in any doubt about the etfective
earthing ot the power point, consult a qualified
electrician.
PAN.EUROPEAN
UNIFIED VOLTAGE
All units are suitabls for use on supplies 220-240 V
AC.

Advertisement

loading

This manual is also suitable for:

Rd-925rds