Download Print this page

Sherwood RD-925 Operating Instructions Manual page 14

Advertisement

Adiusting the speaker settings
. Adjusting the sening of the center speaker and the
subwoofer connected.
Press the SPEAKER MODE button for morc
than 2 seconds to enter the center speaker
mode.
SPEAXEF
MOOE
-tl
n
J\
\J
. In the THEATER. HALL. STADIUM. CHURCH or
noamal stereo mode. it will become the subwoofer
mode directly .
Select the desired subwoofer mode.
SPEAKER
MODE
n
J \
U
. Each time this button is pressed,the subwoofer
mode changes and flickers as follows;
f_l
YES : When using a subwoofer.
NO : When not using a subwoofer.
Select the desired center sDeaker mode.
SPE{EF
IIODE
E
r]
/\
tl
. Each time this button is pressed, the center speaker mode
chanses and flickers as follows:
LARCE I When using a relatively large center speaker.
SMALL : When r-rsing a relatively small center sp€aker.
L -
NONE : When not using a center speaker.
. In the Dolby 3 Stereo mode, the NONE mode can not b€
selected.
Memorize the desired subwoofer mode
while it flickers.
MEMO / ENTEE
o
,lh
U
If the subwoofer display goes off, repeat again from
the above steD 2.
Memorize the desired center speaker mode
while it flickers.
MEMO / Et'tTER
o
n
J \
\-/
. The desired center speaker mode is memorized and
then it becomes the subwoofer mode.
. lf the center speaker display goes off, repeat again
from the above step 2.
Checking the speaker settlng
SPEAXER
MOOE
-t
n
lh\
U
Each time this button is pressed briefly, the setting
of the center speal<er or the subwoofer is displayed.
I
I

Advertisement

loading

This manual is also suitable for:

Rd-925rds