Advertisement
Entering video labels
. It can be operated only on video input sources such
as DVD, LDP, VCR I and AUX/TV.
Select the desired video lnput source to
enter its label
Repeat the steps 3 and .1 to memorize the
rest of up to 8 characters.
Rectifying or clearing a video label
Select the desired video input source to be
rectified or cleared.
Press the VIDEO LABELS
button for more than 2
seconos.
I - . . . _
Repeat the steps 2-5 in "Entering video
labels" procedure.
. To clear a video label, make a blank on each digit.
then the video label is cleared and its video inDut
source will be disolaved.
Select the firsl characler of the video label
. Each time the INPUT SELECTOMNDEX knob is
rohted, the characters which can be selected are total
45 as follows ;
2 6 Ca p ita l L € u e rs :A BC D EF G HI J K LM N OP Q RS
T UVW X YZ
l 0 Ara b ic Nu n e r a ls : | 234567 890
9 Sp e cia l M a r k s : ' ( ) .
+ ,
/ \
Checking the video components
connected
. Use this function to check the video components
connected ro DVD, LDP. VCR I and AUVTV jacks
eacn.
. During play on the video components, press the
VIDEO LABELS and the VCR I RECORD butlons
simultaneously.
+
. The respective input source or its label scrolls on lhe
display and you can check its video and audio
contents in tum as follows;
DVD
-
LD PLAYER + VCR |
-
AUyJTV FRONT+
AU)OTV REAR
. During recording, do not check the video
components connected.
Memorize it within
6 seconds.
If the MEMORY/ENTER button is pressed for more
than 2 seconds on rhe character, a dot( . ) wrll appear
by the character.
lf the MEMORY/ENTER button is pressed without
selecting the desired character, the digit will be blank.
If 6 seconds elapses, repeat again from the step 2.
n
Advertisement
