Advertisement
When CD, DVD, LDP or AUVTV is
selected as input source
. Select the digital (or the analog) input connected as
desired
. Each time this button is pressed,
f-;;r*--.l
the corresponding input is
|
^*'
I
selected as follows;
lk
Tn the nomal stereo or a
(
l
surround mode olher lhan lhe
\J
Dolby DIGITAL(AC-3) mode.
-
OPTICAL-+ COAXIAL )
ANA LOG ---t
I
- In the Dolby DIGITAL(AC-3) mode:Not available for CD
-
(RF:LDP only) -r OPIICAL r COAXIAL -l
. When the selected optical or coaxial digital input is not
connected, the selected DIGITAL INPUT indicator is
flickering, meaning no sound. (Ref€r to "Select the
desired sunound mode" on page 13)
. When DVD, LDP or AUX/TV is selected and the
Dolby DIGITAI-(AC-3) mode is selected, regardless of
the input source selected, the Dolby DIGITAL(AC-3)
program sources on the component connected to the
selected digital input can be heard.
Adjust the stereo balance between the left and
the.ightchannels.
BALANCE
Adjust the subwoofer level.
-
Jh
U
. It is adjustable only when the subwoofer is connected
and the subwoofer is set to "YES". (Refer to
'Adjusting the speaker setting" on page 14 )
To enjoy the impressive bass sound.
o
t\
U
Press it again to cancel.
Operate the selected component for playback.
. When playing back the program sources
with the sufiound sound, refer to
-Enjoying surround sounds" on page 13.
Adjust the (overall) volume.
To mute the sound.
The "MUTE" is flickering.
To resume the previous sound level, press it again.
Adjust the tone (bass and treble)
BASS
TREBLE
Note : Extreme settings at high volume may damage
your speakers.
/.)
I . U
To listen with the headphones.
' Ensure that the SPEAKER ON/OFF switch is set to off.
Advertisement
