Pressures
•
Max Static Pressure:
•
Max Maintained Pressure:
•
Min Maintained Pressure: (Gas Water Heater):
performance supplies should be nominally equal.)
•
Min Maintained Pressure (Gravity System):
from cold tank base to shower handset outlet.)
Temperatures
•
Close temperature control is provided between
•
Optimum Thermostatic Control Range:
of 15°C cold, 65°C hot and nominally equal pressures.)
•
Recommended Hot Supply:
at temperatures up to 85°C for short periods without damage. However for
safety reasons it is recommended that the maximum hot water temperature is
limited to 65°C.)
•
Minimum Differential between Hot Supply and Outlet Temperature:
•
Cold Water Range:
Thermostatic shut-down
•
For safety the thermostat will shut off the hot supply
cold supply fails. (achieved only if the hot supply temperature is greater than
10°C above the set blend temperature.)
Connections
•
Hot: Left
(side nearest flow control), ½" BSP Male.
•
Cold: right
•
outlet: Bottom
note! This product does not allow for reversed inlets and will deliver unstable
temperatures if fitted incorrectly.
Offset connector (inlet centres are 150 mm ± 24 mm).
½" BSP
Connection to Pipework
sPeCIFICaTIons
10 Bar.
5 Bar.
60°C to 65°C. (note! The mixing valve can operate
5°C - 25°C.
(side nearest temperature control), ½" BSP Male.
, ½" BSP Male to flexible hose.
0.1 Bar. (0.1 bar = 1 Metre head
20°C and 50°C.
35°C to 45°C. (achieved with supplies
¾" BSP
Connection to Bar Valve
6
1.0 Bar. (for optimum
10°C.
within 2 seconds if the