Table of Contents
Advertisement
5.
Caution! Make sure that the supply
pipework is flushed before installing
the bar valve.
assemble the bar valve with a sealing
washer/filter in each inlet and attach
to the offset connectors.
note! Connections are: Hot-Left,
Cold-right.
6.
Tighten the connections using a
suitable spanner.
7.
Install the shower fittings (refer to
your shower fittings installation and
user guide).
8.
Turn on the hot and cold water supplies and check for leaks.
9.
Before using the shower, refer to section: 'Commissioning'.
11
Sealing Washer
/ Filter
Hide quick links:
Advertisement
Table of Contents
