Features - Integra DTA-70.1 Instruction Manual

DTA-70.1_En_100108.book Page 4 Friday, January 8, 2010 2:04 PM
Thank you for purchasing an Integra 9-Channel Ampli-
fier. Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable you
to obtain optimum performance and listening enjoyment
from your new 9-Channel Amplifier.
Please retain this manual for future reference.
4

Features

■ 150 Watts per channel, minimum RMS into
8 ohms, 2 channels driven, from 20 to
20,000 Hz with no more than 0.05 % total
harmonic distortion
■ THX™ Ultra2™ certified
■ WRAT–Wide Range Amplifier Technology
(5 Hz-100 kHz bandwidth)
■ Push-Pull amplification design with three-
stage inverted Darlington circuitry
■ Massive toroidal transformer
■ Customized 22,000 µF large capacitors for
effective power supply
■ Audio-tuned reference capacitors for each
channel
■ Low-impedance, copper bus plates for
perfect ground potential
■ Gold-plated, XLR and machined, solid brass
RCA input terminals
■ Custom-designed large power transistors to
drive high currents
■ High-current, low-impedance circuit board
by using thick copper foil (70 µ)
■ Gold-plated, color-coded, transparent
speaker posts
■ Auto power-down function
■ Multi-zone capability (up to Zone 3)
*2
■ Bi-amping capability
■ 12V trigger in
■ Aluminum front panel
■ Detachable power cord
*1
THX and Ultra2 are trademarks of THX Ltd. THX may be
registered in some jurisdictions. All rights reserved.
*2 Depends on AV controller
*1
*2