Mounting Bracket Installation; Installing The Vc5090 In A Forklift - Motorola VC5090 Quick Reference Manual

Quick Reference Guide

Mounting Bracket Installation

The vehicle computer and bracket must be firmly secured to a
NOTE
surface that can support the vehicle computer's weight.
CAUTION
Assemble the mounting bracket onto the vehicle computer as shown
below.
Torque cap screws to 276 ± 8.7 kgf.cm (239.6 ± 7.6 in-lbs).

Installing the VC5090 in a Forklift

CAUTION
Follow the instructions below to properly install the VC5090 in a forklift.
• Determine the best location for mounting the vehicle computer taking
into consideration the driver's field of view and ease of accessing the
vehicle computer.
Motorola requires that the supplied mounting bracket be
used when mounting the vehicle computer. An alternate
RAM Mount mounting bracket is also available.
A qualified engineer must perform the installation in a
vehicle. Improper installation can injure the operator or
damage the vehicle and/or VC5090.
Mounting Bracket
Cap Screw (optional
locking knobs are also
available)
Flat Washer
Lock Washer
Friction Pad
Friction Pad
Mounting Area
9