Installing The Optional Keyboard - Motorola VC5090 Quick Reference Manual

20

Installing the Optional Keyboard

The optional keyboard is only available for the full-screen
NOTE
configuration.
The keyboard kit contains the following items:
• keyboard
• two keyboard brackets
• four caps screws with captive washers
• two locking knobs, two flat washers and two lock washers.
1.
Attach the keyboard brackets to both sides of the VC5090, using the
cap screws with captive washers. Only tighten the cap screws three
turns.
Left Hand
Bracket
Cap Screws with
Captive Washers
Flat Washer
Lock Washer
Locking Knob
2.
Insert the keyboard locking knobs through the washers and brackets
and screw into the keyboard. Tighten fully to lock into place.
3.
Torque the bracket cap screws to 230 kgf/cm (200 in-lbs).
4.
To adjust keyboard position, loosen the right and left locking knobs
two full turns and rotate the keyboard to the desired position. The
keyboard snaps into possible positions as it is rotated.
VC5090 Vehicle Computer