Table of Contents
Advertisement
Units:
Minimum value:
Maxim um value:
Step size:
Factory default:
Description:
On L-band modems, sets the trip threshold at w hich a fault is declared
when the current drawn by the Tx ODU is outside the limit.
Edit-Unit-Advanced-Alarms-Actions Screens
A number of screens are available that control the follow ing:
BER. Controls w hether the BER threshold alar m is enabled.
•
BUC PSU. Controls w hether the combined over/under-current, over-temperature
•
alar m for the Tx DC sw itch is considered a fault or not.
Clr 1:1 alm. Allow s the user to temporarily clear a modem alar m that is preventing a
•
1:1 changeover.
Edit-Unit-Advanced-Operation Menu
Edit/Unit/Advanced/Operation:
This menu allows configuration of redundancy settings, power supply break
acknowledgement and allows a SAF demonstration test shot to be ended,
returning the SAF settings to their state prior to the demonstration mode starting.
Edit-Unit-Advanced-Operation-1 For 1 Screen
Edit/Unit/Advanced/Operation/1-for-1:
Options:
Standby
Vision Series Installation and Operating Handbook
A
0.1
6
0.01A
0.1
11-for-1
3Ack Pw r Bre
1Standby
2Maintenance
3In-service
21-for-n
4End dem o
7-70
Advertisement
Table of Contents
