Table of Contents
Advertisement
6.2.4
L-band FSK/DC Option Card
An FSK/DC option card (part number P3503) is available for performing FSK
communications w ith a BUC. This allows remote monitoring and control of any compatible
BUC via a modulated FSK signal on the IFL cable to the BUC. The card also provides a
DC supply sw itching capability to the BUC. If FSK communications are not required, then
a cheaper option card, namely, the DC Sw itch card (part number P3509) is available.
6.3 Software Options
There are a number of software options available as show n in the table below . These can
be ordered at the time of the original purchase or can be activated in the field. The
mechanism that provides access to these features is called Softw are Activated Features
(SAF) – the SAF concept (including time-limited free access to all features) is explained in
Section 8.5.
In the table, the SAF Code column lists the acronyms by w hich each feature is referred to
in relation to the modem user interfaces, technical datasheets, etc. Note also that the
feature set is being expanded all the time – please contact Customer Technical Support
for up to date information.
Note that the follow ing are provided in the standard Vision base modem: Tx, Rx, DR0,
DR1, IRS, VIT, WIF, AUPC, HCP and ESC.
Feature
Terrestrial data rate 0
to 80Mbps (98Mbps
for ASI)
DVB-S Tx
DVB-DSNG Tx
DVB-S2 Tx
DVB-S Rx
DVB-DSNG Rx
DVB-S2 Rx
DVB IP
Vision Series Installation and Operating Handbook
SAF Code
DR0,
Enables data rates in the given range.
D1L,
D1H,
DR2,
DR3,
DR4,
DR5
DVBST
Enables DVB-S Txoperation.
DSNGT
Enables DVB-DSNG Txoperation.
DVB2T
Enables DVB-S2 Tx operation.
DVBSR
Enables DVB-S Rx operation.
DSNGR
Enables DVB-DSNG Rx operation.
DVB2R
Enables DVB-S2 Rx operation.
DVBIP
Enables MPE and ULE DVB over IP
encapsulation (requires P3714 IP Traffic card).
Without this only MPEG2 TS over IP packets can
be processed by the IP Traffic card.
Softw are Activated Features
Description
6-5
Advertisement
Table of Contents
