Transmit Faults; Transmit Warnings - Paradise Datacom Vision Series Installation And Operating Handbook

12.1 Transmit Faults

Fault Text
Tx fault: External TxCloc kFailureAlarm
Tx cloc k sel ected,
but no clock from
interfac e.
Tx fault: Modul ator TxDPLLLostLoc kAlar m
DPLL has l ost loc k.
12.2 Transmit W arnings
Fault Text
Tx warning: Carrier TxASICarrierAlarm
lost on ASI ports.
Tx war ning: AIS TxASIAISAlar m
detected on ASI
ports.
Tx warning: Sync TxASIMPEGSyncAl arm
loss on ASI ports.
Tx warning: DC bi as TxASIDispAlar m
on ASI ports.
Tx warning: Cloc k TxASICloc kAlar m
error on ASI ports.
Tx warning: FIFO TxASIOverFlowAl arm
overflow on ASI
ports.
Tx warning: FIFO TxASIUnderFlowAlarm
underflow on ASI
ports.
Tx war ning: K28.5 TxASIK285Alarm
error on ASI ports.
Tx warning: Sync TxASIMPEGSyncAl arm
loss on ASI ports.
Tx warning: Cloc k TxASICloc kAlar m
error on ASI ports.
Tx warning: Dec ode TxASIDecoderAl arm
error on ASI ports.
Tx warni ng: Invalid TxConfigAlarm
MODCOD.
Tx war ning: Data TxModOutputAlarm
failure to modulator.
Tx warning: TS TxModT SBufferAl arm
buffer overflow.
Tx war ning: TS s ync TxModMPEGSyncAlar m
not found.
Tx war ning: TS s ync TxModMPEGSyncLostAlar m
lost.
Tx warning: TxModEnc SyncAl arm
Encoder fault.
Tx warning: Framer TxModFrameSync Alarm
sync lost.
Vision Series Installation and Operating Handbook
Fault/W arning Name
Fault/W arning Name
Notes
The modem is set to use an external cloc k but no
clock is being provi ded. The cloc k generation will
use the internal cloc k as a bac kup to maintain the
carrier and signal integrity. Chec k the data
connector is attached and chec k for acti vity on the
clock i nput lines .
Notes
12-2
Relays Other
T
Relays Other