Table of Contents
Advertisement
Async ESC Connector
This connector comprises:
An RS232/RS422/RS485 asynchronous port (reserved for future use).
•
An RS232 serial port (reserved for future use).
•
An RS422 Station Clock input.
•
Receive constellation monitor points.
•
RS232
2
-
3
-
1
RS232
12
5
13
Analog
14
7
15
13
RS422
4
11
13
RX Constellation Monitor Port
To display the receive constellation on an oscilloscope, connect the I and Q signals to the
main X/Y inputs and apply the receive symbol clock to the external trigger input of the
oscilloscope. The main oscilloscope inputs should be set to X/Y display, AC coupled, both
channels on 200 mV/div, w ith the trigger from the external trigger input.
Vision Series Installation and Operating Handbook
ASYNC ESC CONNECTOR
Async port (reserved for future use)
RS422/
RS485
2 (a)
Reserved Input (to satellite)
9 (b)
Reserved Input (to satellite)
3 (a)
Reserved Output (from satellite)
10 (b)
Reserved Output (from satellite)
1
Ground
Serial port (reserved for future use)
Serial Input (RS232 port)
Serial Output ( RS232 port)
Ground
Rx constellation m onitor (Rx signal quality)
Rx I channel
Rx Q channel
Rx symbol clock
Ground
Differential Station Clock Input
Station Clock (a)
Station Clock (b)
Ground
11-4
Advertisement
Table of Contents
