Connecting A Stereo Receiver Or Amplifier - Insignia NS-MDDVD10 User Manual

To connect a television to the DVD player:
1 Move the AV In/DVD switch to DVD.
2 Connect plugs from the one end of the audio/
video cable (included) to the Video and
Audio In/Out jacks on the left side of the
DVD player:
• Connect the yellow plug to the jack
nearest the Headphone jack.
• Connect the red plug to the center jack.
• Connect the white plug to the outside
jack.
3 Connect the plugs from the other end of the
audio/video cable to the jacks on the TV:
• Connect the yellow plug to the video in
jack.
• Connect the red plug to the right audio in
jack.
• Connect the white plug to the left audio in
jack.
4 To watch a DVD on the TV:
• Turn on the DVD player and slide the AV
In/DVD switch to DVD.
• Turn on the TV and follow instructions
provided by the television manufacturer to
play the DVD.
Note:
If your TV does not have audio/video inputs, you will need to
purchase an RF modulator (sold separately) and follow the
instructions included with it to connect the unit to your TV.

Connecting a stereo receiver or amplifier

to the DVD player
You can connect a stereo receiver or an amplifier
to the main unit of the DVD player using the
audio/video cable.
This unit can play Dolby Digital, but only in two
channels.
To connect a stereo receiver or amplifier to
the DVD player:
1 Move the AV In/DVD switch to DVD.
2 Connect plugs from the one end of the audio/
video cable (included) to the Video and
Audio In/Out jacks on the left side of the
DVD player:
• Connect the yellow plug to the jack
nearest the Headphone jack.
• Connect the red plug to the center jack.
10
Insignia NS-MDDVD10 Dual-Screen Portable DVD Player
•
3 Connect the plugs from the other end of the
audio/video cable to the jacks on the stereo
receiver or amplifier:
•
•
•
Connecting the monitor and DVD player to
other equipment
You can play a DVD in the main unit and use a
game system or other video equipment with the
monitor at the same time.
To connect the monitor and DVD player to
other equipment:
Bottom of monitor
Audio/Video cable (included)
1 Connect the built-in DIN cable from the
bottom of the monitor to the Main Unit port
on the right side of the main unit.
2 Connect the plugs from the one end of the
audio/video cable (included) to the Video
and Audio In jacks on the monitor:
•
•
•
3 Connect the plugs from the other end of the
audio/video cable to the jacks on the game
console or other video equipment:
•
•
•
www.insignia-products.com
Connect the white plug to the outside
jack.
Connect the red plug to the right audio in
jack.
Connect the white plug to the left audio in
jack.
The yellow plug does not need to be
connected.
Left side of
main unit
Right side of main unit
Connect the yellow plug to the outside
jack.
Connect the white plug to the center jack.
Connect the red plug to the jack nearest
the built-in DIN cable.
Connect the red plug to the right audio out
jack.
Connect the white plug to the left audio
out jack.
Connect the yellow plug to the video out
jack.
Game console or
other video equipment