Advertisement
SETTING UP YOUR PLAYER
To install your player in a vehicle
1 Loosen the straps of the mounting plate as shown below, then fit the
DVD player or monitor to the mount the "front" position.
2 Slide the horizontal straps A and B through the slots on the back of the
DVD player or monitor, then fold and secure them on to the back of
the mounting plate until the Velcro attaches.
3 Bring straps C1, C2, D1, and D2 in front of the DVD player or monitor
and attach to the Velcro as shown.
4 Fit the straps E1, E2, F1, and F2 around the headrest and secure the two
buckles. Pull the straps tight as shown.
C1
A
SETUP
FUNC.
C2
E1
F1
A
B
BACK
E2
F2
F1
E1
E2
F2
To connect to a 12V vehicle power outlet
1 Plug one end of the vehicle power adapter into the DC IN jack on the
side of your player.
2 Plug the other end of the adapter into a 12V vehicle power outlet or
vehicle cigarette lighter socket.
Power outlet or
cigarette lighter socket
DVD player
SETUP
FUNC.
To connect to AC power
• Plug one end of the AC adapter into the DC IN jack on the side of your
player, then plug the other end into an AC outlet.
Connecting your extra monitor
1 Using the AV/DC cable, connect AV OUT and DC OUT on the DVD
player to AV IN and DC IN on the extra monitor.
2 Turn on your DVD player and monitor.
Extra monitor
UP
CONNECTING HEADPHONES
D1
• Plug headphones into the Headphone jack on both the DVD player
B
and extra monitor. When headphones are plugged into the
FRONT
headphone jack, no sound comes from the built-in speakers.
D2
C1
D1
CONNECTING TO A TV OR MONITOR
You can connect your DVD player to a TV or monitor so you can watch
DVDs on the TV or monitor.
C2
D2
SETUP
FUNC.
1 Plug the end of the supplied AV cable that has one black connector
into the AV OUT jack on your DVD player.
2 Plug the connectors on an RCA cable (not included) into the connec-
tors on the other end of the included AV cable. Make sure that the
colors on the connectors match.
3 Plug the other end of the RCA cable into the AV jacks on the TV or monitor,
making sure to match the colors on the connectors with the jacks.
PULL
PULL
Monitor
USING YOUR DVD PLAYER
Playing a DVD or audio CD
Note: Most DVDs and your DVD player have region codes that help control illegal
distribution of DVDs. The region code for your player is 1. You can only play DVDs
with a region code of 1 or ALL. The region code for a DVD is printed on the DVD
or the DVD packaging.
1 Make sure that your player is connected to power.
2 Slide the ON/OFF switch to the ON position.
3 Slide the OPEN switch. The disc tray opens.
4 Place a disc, label side up, in the disc tray, then close the tray. The disc
starts playing automatically.
5 Use the player navigation controls and buttons on the DVD player to
control playback.
For more information about using your Portable DVD player, see your
online User Guide at www.insigniaproducts.com.
DVD player
SETUP
FUNC.
TV
White = left audio
Red = right audio
or
Yellow = video
(cable not included)
AUDIO
VIDEO
In
In
SPECIFICATIONS
AC adapter voltage: 100-240V ~ 0.5A
Operating frequency: 50/60Hz
Car charger adapter: 12V ~ 800mA
Device input: DC 9-12V ~ 1.5A
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could
void the user' s authority to operate this equipment.
IMPORTANT SAFETY INSTRUCTIONS
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with a dry cloth.
7
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or grounding-type plug. The wide blade is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Unplug this apparatus during lightning storms or when unused for long periods of time.
13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14 To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing,
and no objects filled with liquids, such as vases, shall be placed on it.
15 The wall plug is the disconnecting device. The plug must remain readily operable.
Canada ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 14-0411
Hide quick links:
Advertisement
