Installing The Battery Pack - Insignia NS-P10DVD User Manual

Insignia NS-P10DVD 10.1" Portable DVD Player

Installing the battery pack

The battery must be charged and correctly installed before using it.
To attach the battery pack:
1 Turn the player off.
2 Unplug the AC adapter.
3 Turn the player upside down.
4 Insert the battery pack's catches into the corresponding holes in the
player, then press the battery pack down until it clicks into place.
To charge the battery pack:
1 Turn the player off. The battery pack charges only when the power is
turned OFF.
2 Attach the battery pack to the player.
3 Connect the AC adapter to the player.
When the battery is charging, the CHG indicator turns orange. When
the charging is completed, the indicator turns off.
Note
• While the charging is in progress, do not disconnect the
AC adapter until the CHG indicator turns off. The charging
time of a battery pack is approximately 5.5 hours and
depends on environmental conditions.
• The battery pack may get warm when you are charging it
or operating the player. This is not a defect.
• The battery indicator appears on the screen when the
power in the battery pack is running low.
www.insigniaproducts.com
11